Stone Guillotine Machine Manufacturer for Cube Stone | Speedone
商品説明
Hydraulic Stone Guillotine Machine for Cube Stone & Paving Stone
スピードストーン stone guillotine machine is designed for professional stone factories producing cube stone, cobblestones, paving stone and other natural split products from prepared stone strips or blocks. The KSL-24 configuration uses a two-blade, manual-feed working concept, making it suitable for factories that need flexible production of different stone sizes without using a fully automatic conveyor line. Exact working dimensions, hydraulic force and tooling depend on the selected machine configuration.
What Is a Stone Guillotine Machine?
![]() |
![]() |
| Product display and finished product display | |
A stone guillotine machine is hydraulic stone-processing equipment that uses concentrated force to fracture prepared natural stone along a selected line.
Unlike a diamond saw, the machine does not cut through the complete stone surface with an abrasive blade.
Instead, hydraulic pressure is transferred through splitting tools until the stone fractures naturally.
This makes the machine suitable for products such as:
- Cube stone
- Cobblestones
- Paving setts
- Natural-face paving stone
- Stone strips
- Wall stone
- Building stone
- Landscape stone
The KSL-24 is especially relevant when prepared stone strips need to be repeatedly split into smaller paving or cube-stone products.
Speedone KSL-24 Stone Guillotine Machine
The Speedone KSL-24 is designed around a two-blade manual-feed configuration.
Its main production concept is:
Prepared Stone Strip → Manual Positioning → Hydraulic Splitting → Cube Stone / Cobblestone / Paving Product
This makes it different from both a large block splitter and a fully automatic conveyor splitting line.
Rigid Vertical Machine Frame
The main machine structure forms a strong vertical frame around the working area.
The frame supports the hydraulic working assembly and helps maintain alignment between the splitting tools and stone.
This is important during repeated cube-stone production because the machine may complete many similar splitting cycles during one shift.
Two-Blade Splitting Configuration
The KSL-24 uses a two-blade working concept.
The splitting tools concentrate force into the stone and help start the fracture along the selected working line.
The exact blade geometry and tooling configuration should be matched to the stone and finished product.
Manual Stone Feeding
The KSL-24 configuration uses manual feeding.
This means the operator positions and repositions the stone instead of relying on a fixed conveyor sequence.
Manual feeding can be useful when the factory produces:
- Different stone lengths
- Several cube sizes
- Short production batches
- Different stone materials
- Custom paving products
For mixed production, this flexibility can be more practical than a highly standardized automatic line.
Open Working Table
The accessible working area gives the operator room to:
- Load prepared stone strips
- Align the required split position
- Reposition the workpiece
- Remove finished cubes
- Inspect the splitting tools
Independent Hydraulic Power Unit
The machine includes a separate hydraulic power section beside the main splitting frame.
This unit supplies the pressure required for the splitting cycle.
Exact motor power, pump capacity, oil volume and operating pressure should be confirmed according to the selected Speedone configuration.
Dedicated Control Cabinet
The machine also uses a separate electrical control cabinet for the approved hydraulic operating cycle.
The exact operating procedure should follow the instructions supplied with the specific machine.
![]() |
![]() |
| Product information parameter table and size annotations | |
How Does a Two-Blade Stone Guillotine Work?
A typical production cycle is:
Prepare Stone Strip → Inspect → Load → Position Split Line → Apply Hydraulic Force → Split → Release → Reposition → Repeat
1. Prepare the Stone
The raw stone is first processed into a suitable strip, bar or block.
2. Inspect the Workpiece
Check for serious cracks, loose areas or unstable defects.
3. Load the Stone Strip
Place the workpiece inside the splitting area.
4. Position the Split Line
Align the required fracture position with the splitting tools.
5. Apply Hydraulic Force
The tools apply concentrated pressure to the stone.
6. Complete the Split
When the internal stress exceeds the stone’s resistance, a fracture develops.
7. Reposition the Stone
The finished piece can be removed and the remaining stone strip repositioned for the next split.
This repeated process is especially useful for producing several cubes from one prepared stone bar.
Stone Guillotine Machine for Cube Stone
Cube stone is one of the main applications for the KSL-24 configuration.
A stone factory can first use a saw to prepare rectangular stone bars and then use the guillotine machine to split them into smaller cubes.
A typical workflow is:
Stone Block → Saw Cutting → Rectangular Stone Bar → Guillotine Splitting → Cube Stone → Sorting → Packing
Finished cube stone may be used for:
- Pedestrian paving
- Historic-style streets
- Landscape paths
- Courtyards
- Commercial plazas
- Garden paving
- Driveway accents
The fractured edges provide a more natural appearance than fully saw-cut cubes.
Stone Guillotine Machine for Cobblestones
Cobblestone production often starts with a prepared stone bar.
The bar is split into shorter pieces and may then be repositioned for another splitting operation.
A typical process is:
Stone Bar → First Split → Reposition → Second Split → Cobblestone → Inspection
Finished cobblestone quality can be influenced by:
- Stone bar dimensions
- Stone thickness
- Natural grain
- Tool alignment
- Split spacing
- Stone orientation
- Hydraulic force
Stone Guillotine Machine for Paving Stone
Hydraulic splitting is also suitable for paving stone when the desired product needs a natural broken surface.
Possible products include:
- Granite pavers
- Natural stone setts
- Garden paving
- Courtyard stone
- Landscape paving
- Road paving stone
The guillotine process is especially useful when the buyer wants natural variation rather than a completely smooth or mould-defined surface.
If the required product needs a decorative mould pattern instead of a natural fracture, Speedone’s paving stone stamping machine uses a different processing method.
Stone Guillotine Machine for Granite Cubes
Granite is widely used for cube stone and paving setts because of its durability and natural appearance.
A typical granite production process is:
Granite Block → Saw-Cut Strip → Stone Guillotine → Granite Cube → Sorting → Packing
When selecting a machine, consider:
- Granite type
- Stone strip width
- Stone strip height
- Required cube dimensions
- Natural grain
- Required production volume
Stone Guillotine Machine for Marble
Suitable marble can also be hydraulically split.
However, marble often contains veins that can affect the fracture direction.
Before volume production, consider:
- Vein direction
- Stone thickness
- Strip dimensions
- Desired finished shape
- Stone orientation
Testing representative stone pieces can be useful when introducing a new marble variety.
Stone Strip Splitting and Slicing
The KSL-24 is also identified for stone slicing applications.
In this type of process, prepared stone is divided through controlled hydraulic fracture rather than conventional saw cutting.
This is especially useful when the required finished surface should keep natural split characteristics.
A possible process is:
Stone Slab or Block → Pre-Sizing → Prepared Stone Strip → Hydraulic Splitting → Smaller Natural-Stone Piece
Why Manual Feeding Can Be Useful
Fully automatic equipment is not always the best solution for every stone factory.
Manual feeding can be useful when:
- Several cube sizes are produced
- Stone dimensions vary
- Production batches are smaller
- Different stone materials are processed
- Frequent repositioning is required
This makes the KSL-24 especially relevant to factories with mixed production rather than one continuous standardized product.
Manual Feed vs. Automatic Stone Splitting
| Factor | Manual-Feed Guillotine | Automatic Splitter |
|---|---|---|
| Stone Feeding | Operator positioned | Can be automated |
| Size Flexibility | Higher | Better for repeated sizes |
| Product Changes | Flexible | More setup-dependent |
| System Complexity | Simpler | Higher |
| High-Volume Repetition | Application-dependent | Strong application |
Factories that need a higher level of automation can compare this machine with Speedone’s automatic stone splitter for granite and marble.
Two-Blade Stone Splitter vs. General Stone Guillotine
The two-blade configuration gives the KSL-24 a more specific production role.
A general stone guillotine may be used for broader block-splitting applications.
The KSL-24 is more focused on:
- Prepared stone bars
- Cube stone
- Cobblestones
- Repeated manual positioning
- Two-blade splitting
- Natural paving products
This makes the machine easier to evaluate when the buyer already knows the finished product that needs to be manufactured.
Stone Guillotine Machine vs. Mushroom Face Trimming Machine
Both machines may use hydraulic fracture, but they produce different products.
A cube-stone guillotine is mainly used to divide prepared stone bars or blocks.
A mushroom-face machine is mainly used to trim selected edges while preserving a raised decorative center.
Factories producing architectural wall stone can review Speedone’s natural stone splitter and mushroom-face trimming alternative.
Stone Guillotine Machine vs. Granite Stamping Machine
Granite cubes and stamped decorative pavers use different processing methods.
| 特徴 | Stone Guillotine Machine | Granite Stamping Machine |
|---|---|---|
| Main Process | Natural fracture | Mould pressing |
| Finished Appearance | Natural variation | Tool-defined pattern |
| Cube Stone | Strong application | Not primary |
| Decorative Patterned Paver | Secondary | Strong application |
For mould-defined granite paving, see Speedone’s granite stamping machine for pavers.
Stone Guillotine Machine vs. Stone Pressing Machine
The equipment may look similar because both use substantial mechanical force.
However, the working purpose is different.
Stone Guillotine = Controlled Natural Fracture
Stone Pressing Machine = Mould-Based Forming
Factories producing mould-formed stone products can review Speedone’s stone pressing machine for granite and marble.
Stone Guillotine Machine vs. Hydraulic Stone Stamping Machine
A hydraulic stamping machine applies force through decorative moulds or tooling.
A stone guillotine instead uses concentrated force to start a natural fracture.
The guillotine is generally more suitable for:
- Cube stone
- Cobblestones
- Natural pavers
- Natural split products
For mould-defined decorative production, see Speedone’s hydraulic stone stamping machine.
Stone Guillotine Machine vs. Diamond Saw
A hydraulic stone guillotine and diamond saw are often used together.
| 特徴 | Stone Guillotine | Diamond Saw |
|---|---|---|
| Process | Fracture | Abrasive cutting |
| Surface | Natural split | Smooth saw-cut |
| Blank Preparation | Secondary role | Strong application |
| Cube Production | Strong after pre-sizing | Useful for preparing bars |
A practical factory workflow is:
Diamond Saw for Stone Bars → Stone Guillotine Machine for Final Cube Splitting
Why Stone Bar Preparation Matters
Consistent stone bars make repeated cube production easier to manage.
Important factors include:
- Bar width
- Bar height
- Bar length
- Stone straightness
- Surface condition
- Natural grain direction
Large variation in stone-bar dimensions can increase positioning time and finished-product variation.
Why Splitting Tool Alignment Matters
The splitting tools determine where concentrated hydraulic force enters the stone.
Poor alignment may cause:
- Unexpected fracture direction
- Excessive edge breakage
- Uneven finished cubes
- Tool wear
- Reduced repeatability
The intended splitting line should therefore be aligned carefully before each cycle.
How Much Hydraulic Force Is Required?
There is no single force rating suitable for every cube-stone product.
The required force depends on:
- Stone material
- Stone strength
- Stone bar width
- Stone thickness
- Tool geometry
- Natural grain
- Finished cube dimensions
A practical machine-selection process is:
Stone Material → Bar Dimensions → Cube Dimensions → Tooling → Required Force → Machine
The machine should match the actual workpiece rather than being selected only by maximum hydraulic tonnage.
Planning a Cube Stone Production Workflow
A practical factory workflow may include:
Raw Stone → Block Sawing → Stone Bar Preparation → Staging → Manual-Feed Guillotine Splitting → Inspection → Sorting → Packing
Total output depends on the complete process.
Possible bottlenecks include:
- Slow stone-bar preparation
- Manual loading
- Frequent size changes
- Workpiece alignment
- Finished-cube removal
- Sorting
- 梱包
The hydraulic cycle time alone does not determine total factory output.
How to Choose the Right Stone Guillotine Machine for Cube Stone
1. Define the Stone Material
Specify granite, marble, limestone, sandstone or another suitable stone.
2. Define Stone Bar Dimensions
Provide typical length, width and height.
3. Define Maximum Workpiece Size
The machine must accommodate the largest routine production piece.
4. Define Required Cube Dimensions
The finished cube size affects splitting frequency and workpiece positioning.
5. Define the Product Type
Clarify whether you produce cubes, cobblestones, paving setts, strips or another natural split product.
6. Confirm the Feeding Method
Determine whether manual feeding is suitable or whether a higher level of automation is needed.
7. Evaluate the Two-Blade Configuration
Make sure the selected tooling suits the stone and finished product.
8. Evaluate Hydraulic Capacity
Required force should match the actual material and dimensions.
9. Evaluate Working Accessibility
Operators need sufficient access for repeated loading, positioning and unloading.
10. Define Production Target
Estimate realistic output per shift.
11. Consider Wear Parts
Discuss splitting tools and hydraulic wear components before purchasing.
12. Evaluate Supplier Support
Technical documentation, spare parts and application support are important for professional stone machinery.
Information to Send Speedone for a Quotation
To help Speedone evaluate a suitable stone guillotine machine, provide:
- Stone material
- Raw-stone photographs
- Stone bar length
- Stone bar width
- Stone bar height or thickness
- Maximum workpiece dimensions
- Approximate workpiece weight
- Required cube or paving dimensions
- Finished-product photographs
- Required production volume
- Number of product sizes
- Manual or automatic feeding preference
- Factory voltage and frequency
- Available installation area
- Current stone-processing method
Finished-product photos are particularly useful because they show the required natural split appearance more clearly than dimensions alone.
Common Cube Stone Splitting Problems
The Stone Fractures Away from the Intended Line
Natural grain, bedding, veins or internal cracks may redirect the fracture.
The Cube Edges Break Too Much
Check stone condition, tool alignment and workpiece positioning.
Finished Cube Dimensions Vary Too Much
Check the consistency of the prepared stone bars and manual positioning.
The Tools Contact Unevenly
Inspect the workpiece shape, support and approved tool alignment.
The Machine Seems to Need More Pressure
Confirm that the workpiece is within the approved operating range and do not exceed manufacturer-rated hydraulic settings.
Production Is Lower Than Expected
Measure stone-bar preparation, loading, alignment, splitting, removal, sorting and packing separately to identify the actual bottleneck.
Stone Guillotine Machine Maintenance
Routine inspection should include:
- Hydraulic oil
- Hydraulic cylinder
- Hydraulic pump
- Electric motor
- Hydraulic hoses
- Fittings
- Control valves
- Pressure controls
- Upper splitting assembly
- Two-blade tooling
- Tool guides
- Working table
- Main machine frame
- Electrical cabinet
- Foot controls where fitted
- Safety systems
Hydraulic leaks should be investigated promptly.
Damaged splitting tools or hoses should not remain in production.
Maintenance should follow the documentation supplied with the selected Speedone machine.
Stone Guillotine Machine Safety
A hydraulic stone guillotine generates substantial mechanical force, and fractured natural stone can produce unpredictable fragments.
- Only trained personnel should operate the machine.
- Inspect every workpiece before splitting.
- Keep hands away from the splitting tools.
- Make sure the stone is stable before starting the cycle.
- Do not reposition the workpiece while hydraulic force is applied.
- Do not bypass safety controls.
- Inspect hydraulic hoses regularly.
- Wear appropriate personal protective equipment.
- Keep unauthorized personnel away from the machine.
- Use suitable handling equipment for heavy workpieces.
- Follow lockout procedures during maintenance.
- Do not exceed approved workpiece dimensions.
- Do not exceed manufacturer-rated hydraulic settings.
- Replace damaged tooling before continued operation.
Who Uses Cube Stone Guillotine Machines?
This type of machine may be suitable for:
- Granite processing factories
- Marble processing factories
- Cube stone manufacturers
- Cobblestone producers
- Paving stone factories
- Landscape stone suppliers
- Natural stone quarries
- Architectural stone processors
- Stone machinery distributors
Speedoneを選ぶ理由
スピードストーン supplies professional stone-processing, handling and installation equipment.
When selecting a stone guillotine machine for cube-stone production, buyers should compare the complete production requirement instead of focusing only on hydraulic-force ratings.
A practical selection process is:
Stone Material → Stone Bar Dimensions → Finished Cube Size → Two-Blade Tooling → Hydraulic Requirement → Feeding Method → Production Target
Buyers should also consider:
- Main-frame rigidity
- Hydraulic power system
- Two-blade configuration
- Working opening
- Manual positioning access
- Stone support
- Control system
- Tooling availability
- Spare-parts support
- Technical documentation
- Supplier communication
For cube stone and cobblestone production, the correct stone guillotine machine should be selected around the incoming stone bar and required finished cube rather than maximum hydraulic force alone. The KSL-24 manual-feed, two-blade configuration is especially useful where a factory needs flexible production of different stone sizes without committing to a fully automatic conveyor line.
よくある質問
What is a stone guillotine machine?
A stone guillotine machine uses hydraulic force and splitting tools to fracture prepared natural stone into cubes, paving stone, cobblestones and other natural split products.
What is the KSL-24 stone guillotine machine used for?
The KSL-24 configuration is designed for cube stone and stone slicing applications using a two-blade manual-feed working concept.
Can the machine produce cube stone?
Yes. Cube stone is one of the main applications for suitable two-blade hydraulic stone splitting equipment.
Can it produce cobblestones?
Suitable prepared stone bars can be repeatedly split into cobblestones when the stone dimensions and machine configuration match the required finished product.
Can the machine split granite?
Suitable granite can be processed when its dimensions and material characteristics remain within the approved working range.
Can it process marble?
Suitable marble can be hydraulically split, although natural veins may influence the fracture direction.
What does two-blade stone splitting mean?
A two-blade configuration uses coordinated splitting tools to concentrate hydraulic force into the stone and initiate a fracture along the intended line.
Is the KSL-24 automatically fed?
The KSL-24 configuration described here uses manual feeding. Automatic feeding should only be assumed when a different machine configuration specifically includes it.
What is the difference between a stone guillotine and a paving stone stamping machine?
A guillotine creates a natural fracture, while a stamping machine uses mould-defined tooling to create a controlled decorative form or pattern.
Why should stone bars be prepared before cube splitting?
More consistent stone-bar dimensions can improve positioning, repeatability and production flow during repeated cube splitting.
How much hydraulic force is required?
The required force depends on stone material, bar width, thickness, natural grain, tooling and required cube dimensions.
What information should I provide for a quotation?
Provide the stone material, raw-material photos, bar dimensions, maximum workpiece size, finished cube dimensions, production target, feeding preference and factory power supply.




