Building Stone Splitter Manufacturer for Wall Stone | Speedone
Speedone building stone splitter is an automatic four-blade hydraulic machine for wall stone, granite, sandstone, limestone and natural building stone processing. Designed for professional stone factories, it supports efficient splitting of architectural blocks, landscape stone and split-face products.
- Gewicht : 1.8T
- Pressure : 80T
- Power : 7.5KW
Product Beschrijving
Automatic Building Stone Splitter for Wall Stone & Natural Blocks
De Speedone building stone splitter is designed for professional stone factories producing wall stone, natural building blocks, landscape stone, retaining-wall stone and architectural split-face products. The KSL-24S3 uses a four-blade automatic working system with a 300×300 self-sliding configuration. The correct machine should be selected according to stone type, incoming dimensions, finished product, tooling and required production output.
What Is a Building Stone Splitter?
![]() |
![]() |
| Product display and finished product display | |
A building stone splitter is industrial hydraulic equipment used to fracture prepared natural stone into products for construction, landscaping and architectural masonry.
Unlike a diamond saw, which removes material to create a smooth cut, a hydraulic splitter applies concentrated force until the stone fractures naturally.
This process can create a rough natural surface suitable for:
- Wall stone
- Natural building blocks
- Landscape stone
- Retaining-wall stone
- Facade stone
- Garden wall stone
- Architectural masonry
- Natural paving blocks
- Split-face construction stone
For a professional stone factory, the goal is not simply to break stone.
The machine should help produce usable dimensions, a natural fractured surface and a product that fits the final building or landscape application.
Speedone KSL-24S3 Building Stone Splitter
The Speedone KSL-24S3 is designed as a four-blade automatic stone splitting machine.
The S3 configuration is identified as a four-blade 300×300 self-sliding version.
A typical production concept is:
Prepared Stone → Self-Sliding Feed → Positioning → Four-Blade Splitting → Building Stone → Discharge → Inspection
This configuration is particularly useful when prepared stone blanks need repeated splitting and organized material movement.
Main Structure of the Building Stone Splitter
Rigid Vertical Machine Frame
The main machine body uses a strong vertical frame around the hydraulic splitting area.
The frame supports the working assembly and helps maintain alignment between the stone and splitting tools during repeated cycles.
This is important when processing dense granite, sandstone, limestone and other natural building materials.
Four-Blade Splitting System
The KSL-24S3 uses four splitting tools around the working area rather than relying on only one upper splitting blade.
The tooling concentrates hydraulic force into the stone from multiple directions.
The final fracture can be influenced by:
- Stone mineral structure
- Natural grain
- Bedding direction
- Stone thickness
- Workpiece shape
- Tool alignment
- Hydraulic force
- Existing cracks
The machine should therefore be matched to the actual building-stone product rather than selected only by blade count.
Self-Sliding Material Feed
The KSL-24S3 uses a self-sliding material-movement concept.
This helps move prepared stone into the working area and supports repeated production cycles.
For factories producing similar wall or building-stone products, this can make material flow easier to organize.
Roller Feeding Structure
Roller-style support helps the stone move toward the splitting area with less dragging resistance.
This can be useful when processing:
- Prepared stone blocks
- Long stone sections
- Repeated wall-stone blanks
- Landscape-stone pieces
Hydraulic Splitting Assembly
The hydraulic system creates the force required to fracture the stone.
The required force depends on the material, stone dimensions, natural grain and tooling.
Maximum hydraulic force alone should not determine the final machine choice.
Electrical Control System
The machine includes a separate electrical control cabinet for the approved automatic working sequence.
Exact feed logic and cycle settings depend on the final machine configuration.
![]() |
![]() |
| Product information parameter table and size annotations | |
How Does a Building Stone Splitter Work?
A typical working process is:
Inspect Stone → Load → Feed → Position → Support → Hydraulic Split → Release → Discharge → Inspect
1. Prepare the Stone
The raw material is first cut or prepared into a suitable block, blank or bar.
2. Inspect the Workpiece
Check for serious cracks, loose sections or unstable areas.
3. Load the Stone
Place the workpiece onto the approved support or feeding structure.
4. Feed and Position
Move the stone into the splitting area and align the required fracture position.
5. Support the Stone
Make sure the workpiece is stable before pressure is applied.
6. Apply Hydraulic Force
The splitting tools concentrate force into the stone until a fracture develops.
7. Discharge the Finished Product
After the splitting tools return to the approved position, the finished stone can move away from the working area.
8. Inspect the Result
Check dimensions, fracture quality, natural face and edge condition before sorting.
Why Use a Hydraulic Building Stone Splitter?
Natural building stone can be split manually, but factory production usually requires a more controlled and repeatable process.
A hydraulic splitter can provide:
- Controlled splitting force
- Repeatable production cycles
- Reduced repeated manual hammering
- Natural split-face surfaces
- More organized material flow
- Better suitability for repeated stone blanks
- Compatibility with factory handling systems
This type of machine is especially useful when the finished product should retain a natural fractured appearance rather than a smooth saw-cut surface.
Building Stone Splitter for Wall Stone
Wall stone is one of the strongest applications for a professional building stone splitter.
Suitable finished products can be used for:
- Exterior walls
- Garden walls
- Retaining walls
- Villa facades
- Landscape features
- Architectural masonry
- Commercial building projects
A common workflow is:
Natural Stone Block → Sawing / Pre-Sizing → Hydraulic Splitting → Wall Stone → Sorting → Packing
Sawing creates the basic dimensions, while hydraulic splitting creates the natural visible surface.
Building Stone Splitter for Granite
Granite is widely used for architectural and landscape stone because of its durability and natural appearance.
Possible products include:
- Granite wall stone
- Landscape blocks
- Retaining-wall stone
- Facade pieces
- Natural paving blocks
- Architectural masonry
A practical machine-selection process is:
Granite Type → Blank Dimensions → Finished Building Stone → Tooling → Hydraulic Requirement → Machine
Granite varies between quarry sources, so the actual material should be considered before the final configuration is selected.
Building Stone Splitter for Sandstone
Suitable sandstone can be processed into wall, landscape and architectural stone products.
Sandstone often contains visible bedding layers, so stone orientation can strongly influence the fracture.
Important factors include:
- Bedding direction
- Stone density
- Blank thickness
- Required wall-stone dimensions
- Desired natural-face appearance
Representative stone samples are useful when evaluating a new sandstone product.
Building Stone Splitter for Limestone
Limestone is also widely used for architectural and landscape applications.
Suitable material may be processed into:
- Natural wall blocks
- Garden stone
- Facade stone
- Landscape masonry
- Rustic building products
Limestone characteristics can vary significantly between quarry sources, so the actual stone should be evaluated before full production.
Building Stone Splitter for Natural Stone Blocks
Natural building blocks can be produced from larger stone pieces that have already been pre-sized to manageable dimensions.
A typical process is:
Raw Stone → Primary Cutting → Prepared Blank → Building Stone Splitter → Natural Block → Inspection
This process is especially suitable when the finished block should retain a rugged natural appearance.
Building Stone Splitter for Architectural Stone
Architectural stone needs to combine usable dimensions with a surface suitable for the final project.
Hydraulic splitting can create:
- Natural surface relief
- Visible mineral texture
- Irregular shadow depth
- Rustic edge character
- Natural variation between pieces
These features are commonly used in facade, landscape and masonry designs.
Building Stone Splitter for Landscape Stone
Landscape stone often allows more natural variation than precision interior stone products.
Potential applications include:
- Garden walls
- Retaining-wall blocks
- Landscape edging
- Decorative stone structures
- Outdoor architectural features
Hydraulic splitting helps preserve the natural appearance of the stone while reducing repeated manual dressing.
Building Stone Splitter vs. Automatic Stone Splitter
Een automatic stone splitter is a broad machine category.
A building stone splitter has a more specific product focus on construction and architectural natural stone.
| Factor | Building Stone Splitter | General Automatic Stone Splitter |
|---|---|---|
| Main Products | Wall and building stone | Multiple stone products |
| Architectural Focus | Strong | Application-dependent |
| Natural Split Surface | Primary requirement | Product-dependent |
For a broader overview of automatic stone splitting equipment, see Speedone’s automatic stone splitter for granite and marble.
Building Stone Splitter vs. Mushroom Face Trimming Machine
Both machines can produce architectural wall stone, but the process and finished appearance are different.
A building stone splitter mainly divides prepared material into usable natural-stone products.
A mushroom-face machine focuses on trimming the perimeter while keeping a raised central face.
| Functie | Building Stone Splitter | Mushroom Face Trimmer |
|---|---|---|
| Main Process | Split stone into building products | Trim the perimeter |
| Wall Stone | Strong application | Strong application |
| Raised Center Face | Not primary | Primary feature |
For mushroom-face and localized wall-stone trimming, buyers can review Speedone’s natural stone splitter and mushroom-face trimming alternative.
Building Stone Splitter vs. Paving Stone Stamping Machine
Natural stone splitting and paving-stone stamping use hydraulic force for different purposes.
A building stone splitter creates a natural fracture.
A paving stone stamping machine uses mould-defined tooling to create a controlled shape or decorative pattern.
A building stone splitter is better suited to:
- Natural wall stone
- Building blocks
- Landscape stone
- Natural masonry
For mould-defined paving products, see Speedone’s paving stone stamping machine.
Building Stone Splitter vs. Granite Stamping Machine
Granite can be split or stamped depending on the required finished product.
Splitting exposes the natural stone structure.
Stamping uses a mould or defined tool profile to create a controlled shape.
For decorative granite pavers, see Speedone’s granite stamping machine for pavers.
Building Stone Splitter vs. Stone Pressing Machine
Both machines may use hydraulic pressure, but the purpose is different.
| Functie | Building Stone Splitter | Stone Pressing Machine |
|---|---|---|
| Process | Natural fracture | Mould-based pressing |
| Surface | Natural split | Tool-defined |
| Building Stone | Primary application | Application-dependent |
For mould-based stone forming, buyers can review Speedone’s stone pressing machine for granite and marble.
Building Stone Splitting vs. Hydraulic Stone Stamping
Hydraulic stone stamping creates products according to mould geometry.
Building stone splitting instead relies on controlled natural fracture.
This makes splitting more suitable for:
- Rustic wall stone
- Landscape blocks
- Natural facade pieces
- Building masonry
For decorative mould-based stone products, Speedone’s hydraulic stone stamping machine is the more relevant equipment type.
Building Stone Splitter vs. Diamond Saw
A hydraulic splitter and diamond saw are often used together.
The saw controls the basic dimensions.
The splitter creates the natural visible surface.
| Functie | Building Stone Splitter | Diamond Saw |
|---|---|---|
| Process | Fracture | Cutting |
| Surface | Natural split | Saw-cut |
| Dimensional Preparation | Secondary role | Strong application |
| Natural Architectural Texture | Strong | Limited |
A practical workflow is:
Diamond Saw for Pre-Sizing → Building Stone Splitter for Natural Architectural Finish
Why Four-Blade Splitting Matters
The KSL-24S3 uses a four-blade automatic configuration.
Multiple tools can apply splitting force around the active workpiece during the approved cycle.
The tooling can influence:
- Fracture initiation
- Natural surface appearance
- Edge condition
- Finished geometry
- Production repeatability
The final result still depends on the natural characteristics of the stone.
What Does the 300×300 S3 Configuration Mean?
The KSL-24S3 is identified as a four-blade 300×300 self-sliding configuration.
This designation helps distinguish it from other Speedone stone-splitting configurations.
Buyers should still provide actual stone dimensions when requesting a quotation.
A nominal machine designation should not be treated as a guarantee that every stone shape or material within that size will split in the same way.
Why Self-Sliding Feed Matters
Repeated building-stone production requires the material to move into and away from the splitting area efficiently.
A self-sliding configuration can help organize:
- Stone feeding
- Repeated positioning
- Operator workflow
- Finished-product movement
- Production rhythm
Actual productivity still depends on the complete factory workflow, not only the hydraulic splitting cycle.
Why Stone Preparation Matters
Prepared blanks with relatively consistent dimensions are easier to feed and process repeatedly.
Important incoming-material information includes:
- Stone length
- Stone width
- Stone height or thickness
- Approximate weight
- Natural grain direction
- Visible cracks
The required finished dimensions should also be defined before the machine is selected.
How Much Hydraulic Force Is Required?
There is no single hydraulic-force value suitable for every building stone.
The required force depends on:
- Stone type
- Material strength
- Stone width
- Stone thickness
- Natural grain
- Tooling configuration
- Required finished dimensions
A practical selection process is:
Stone Material → Incoming Dimensions → Building Stone Product → Four-Blade Tooling → Required Force → Machine
Higher hydraulic force does not automatically produce a better finished product.
Planning a Building Stone Production Workflow
A professional factory workflow may include:
Raw Stone Storage → Saw Cutting → Blank Preparation → Staging → Automatic Feeding → Hydraulic Splitting → Inspection → Sorting → Packing
Actual output may also be limited by:
- Slow stone preparation
- Inconsistent blanks
- Material-loading delays
- Finished-product accumulation
- Inspection
- Sorting
- Verpakking
The building stone splitter should therefore be considered as one part of the complete production system.
How to Choose the Right Building Stone Splitter
1. Define the Stone Material
Specify granite, sandstone, limestone, marble, quartzite or another compatible natural stone.
2. Define Incoming Stone Dimensions
Provide typical length, width and thickness.
3. Define Maximum Workpiece Size
Provide the largest routine production piece.
4. Define the Finished Product
Clarify whether you need wall stone, retaining-wall blocks, landscape stone, facade pieces or another building product.
5. Define Finished Dimensions
Provide target length, width and thickness.
6. Provide Finished-Product Photos
Natural fracture appearance is difficult to define using dimensions alone.
7. Evaluate the Four-Blade Configuration
Confirm that the tooling arrangement matches the selected stone and product.
8. Evaluate Self-Sliding Feeding
Determine whether automatic material movement matches the planned production method.
9. Evaluate Hydraulic Capacity
Required force should match actual stone characteristics and dimensions.
10. Define Production Target
Estimate realistic output per shift rather than considering only one splitting cycle.
11. Consider Wear Parts
Discuss splitting tools, hydraulic components, rollers and related wear items before purchasing.
12. Evaluate Supplier Support
Technical documentation, spare parts and application support are important for industrial stone equipment.
Information to Send Speedone for a Quotation
To help Speedone evaluate the correct building stone splitter, provide:
- Stone material
- Raw-stone photographs
- Typical workpiece length
- Typical workpiece width
- Typical workpiece thickness
- Maximum workpiece dimensions
- Approximate stone weight
- Required finished building-stone dimensions
- Finished-product photographs
- Required production volume
- Number of product sizes
- Required automation level
- Factory voltage and frequency
- Available installation area
- Current stone-processing workflow
Raw-material and finished-product photos are especially useful because natural fracture characteristics can vary significantly between different stones.
Common Building Stone Splitting Problems
Stone Fractures Away from the Intended Position
Natural grain, bedding, veins or existing cracks may redirect the fracture.
Finished Dimensions Vary Too Much
Review incoming blank consistency, feeding position and natural stone structure.
One Side Breaks More Than Expected
Inspect workpiece support, four-blade contact and stone orientation.
The Stone Does Not Move Smoothly
Inspect the feeding path, rollers, workpiece dimensions and support system.
Excessive Edge Breakage Occurs
Review stone quality, tooling contact and the approved hydraulic configuration.
Production Is Lower Than Expected
Measure preparation, feeding, splitting, discharge, inspection, sorting and packing separately to identify the actual bottleneck.
Building Stone Splitter Maintenance
Routine inspection should include:
- Hydraulic oil
- Hydraulic cylinder
- Hydraulic pump
- Electric motor
- Hydraulic hoses
- Fittings
- Pressure controls
- Four-blade splitting tools
- Tool guides
- Feed rollers
- Self-sliding structure
- Stone supports
- Main machine frame
- Electrical controls
- Safety systems
Hydraulic leaks should be investigated promptly.
Damaged tooling, hoses, rollers or feeding components should not remain in production.
Maintenance should follow the documentation supplied for the selected Speedone machine.
Building Stone Splitter Safety
An automatic hydraulic building stone splitter combines substantial splitting force with moving material-handling components.
- Only trained personnel should operate the machine.
- Inspect every stone workpiece before processing.
- Keep hands away from all splitting tools.
- Keep clear of moving feeding components.
- Do not manually reposition stone during the automatic cycle.
- Do not bypass guards or safety controls.
- Inspect hydraulic hoses regularly.
- Use suitable handling equipment for heavy workpieces.
- Wear appropriate personal protective equipment.
- Keep unauthorized personnel away from the working area.
- Follow lockout procedures during maintenance.
- Do not exceed approved workpiece dimensions.
- Do not exceed manufacturer-rated hydraulic settings.
- Replace damaged tooling before continued operation.
Who Uses Building Stone Splitters?
This type of equipment may be suitable for:
- Building stone factories
- Wall stone manufacturers
- Granite processing factories
- Sandstone processors
- Limestone factories
- Landscape stone suppliers
- Natural stone quarries
- Architectural stone manufacturers
- Retaining-wall stone producers
- Stone machinery distributors
Waarom kiezen voor Speedone?
Speedone supplies professional equipment for stone processing, handling and installation.
When selecting a building stone splitter, buyers should evaluate the complete application rather than comparing hydraulic-force ratings alone.
A practical machine-selection process is:
Stone Material → Incoming Dimensions → Building Stone Product → Four-Blade Tooling → Hydraulic Requirement → Self-Sliding Feed → Production Target
Important purchasing factors include:
- Main-frame rigidity
- Four-blade configuration
- Hydraulic system
- Self-sliding material feed
- Roller support structure
- Working opening
- Control system
- Tooling availability
- Wear-part support
- Technical documentation
- Supplier communication
The correct building stone splitter should be selected around the actual natural stone and finished architectural product rather than maximum hydraulic force alone. The Speedone KSL-24S3 four-blade automatic 300×300 self-sliding configuration is especially relevant for wall stone, natural building blocks, landscape stone and repeated architectural stone production.
Veelgestelde vragen
What is a building stone splitter?
A building stone splitter uses controlled hydraulic force to fracture prepared natural stone into wall stone, building blocks, landscape stone and architectural masonry products.
What is the Speedone KSL-24S3 used for?
The KSL-24S3 is a four-blade automatic stone splitting machine identified as a 300×300 self-sliding configuration for suitable repeated building-stone production.
Can a building stone splitter process granite?
Suitable granite can be processed when the workpiece dimensions and material characteristics remain within the approved machine range.
Can it process sandstone?
Suitable sandstone can be hydraulically split, although bedding direction and natural material structure may influence the fracture.
Can it process limestone?
Suitable limestone can be processed into wall, landscape and architectural stone products when matched to the correct machine and tooling configuration.
What products can a building stone splitter make?
Potential products include wall stone, retaining-wall blocks, landscape stone, facade pieces, architectural masonry and other natural split building products.
What does four-blade splitting mean?
A four-blade system uses multiple splitting tools around the working position to concentrate hydraulic force during the approved machine cycle.
What does self-sliding mean?
For the KSL-24S3, self-sliding refers to an automatic material-movement configuration that supports repeated feeding during stone splitting.
What is the difference between a building stone splitter and a mushroom-face machine?
A building stone splitter mainly divides prepared stone into construction products, while mushroom-face equipment focuses on trimming selected perimeter areas to create a raised decorative center.
Why should stone be pre-sized before splitting?
More consistent incoming blanks can improve feeding, tool positioning, production repeatability and finished-product control.
How much hydraulic force is required?
The required force depends on stone type, material strength, dimensions, natural grain, tooling and the required finished product.
What information should I provide for a quotation?
Provide stone material, raw-stone photos, typical and maximum dimensions, approximate weight, required finished building-stone dimensions, product photos, production target, automation requirements and factory power supply.




