Вилочный подъемник для плит — Speedone Подъемник для плит (5T)-E

Speedone Slab Lifter(5T)-E – 5T Forklift Lifting Attachment

Сайт Скоростной плитолифт (5T)-E is a steel lifting attachment designed for heavy slab and industrial material-handling applications where a forklift is used as part of the lifting system.

The most important specifications are straightforward: the attachment has a published 5-ton rated lifting capacity while the equipment itself weighs only 20 kg. These two values describe completely different things and should never be confused—the 20 kg figure is the attachment weight, while 5T is the published lifting-capacity figure for the Slab Lifter(5T)-E.

For professional selection, buyers should evaluate not only the nominal 5T rating but also the forklift capacity, load center, mounting interface, lifting-point arrangement, attachment retention method, actual load dimensions, and working height.

Slab Lifter(5T)-E Technical Specifications

20 kg Equipment Weight vs 5T Lifting Capacity

This is one of the most important specifications to explain clearly.

The 20 kg equipment weight should never be described as the lifting capacity. Likewise, the 5T figure does not represent the physical weight of the attachment.

What Does the 5T Rating Mean?

The current product information identifies the Slab Lifter(5T)-E as a 5-ton lifting attachment.

For engineering selection, buyers should confirm exactly how this rating is defined in the current Speedone technical documentation, including:

• rated lifting condition,
• lifting-point position,
• load distribution,
• attachment geometry,
• hook, sling, or lifting accessory arrangement,
• and any operating limitations.

Why Forklift Capacity Still Matters

A lifting attachment changes how the load acts on the forklift. The attachment itself adds weight, while the lifting point may position the suspended load farther from the forklift’s normal load center.

This is why buyers should provide the exact forklift model rather than ordering only according to the “5T” product name.

Why the 20 kg Attachment Weight Matters

At a published equipment weight of 20 kg, the Slab Lifter(5T)-E is relatively compact compared with many larger forklift lifting structures.

However, usable forklift capacity should not be calculated by simply subtracting 20 kg from the forklift’s nominal capacity. The position of the attachment and suspended load also changes the load moment.

For a proper compatibility check, confirm:

• forklift model,
• rated forklift capacity,
• rated load center,
• attachment weight,
• attachment center of gravity where available,
• load position,
• and required lift height.

How Does the Slab Lifter(5T)-E Attach to a Forklift?

The supplied product information identifies this model as forklift lifting equipment but does not define the exact fork-interface or retention system.

Before ordering, confirm the current Speedone drawing for:

• fork-pocket or mounting dimensions,
• compatible fork width and thickness,
• fork insertion depth,
• attachment retention method,
• locking pin or securing arrangement where applicable,
• and the approved installation procedure.

How Does the Lifting System Work?

The exact hook, sling, or load-engagement arrangement is not defined in the supplied specification, so it should be confirmed against the current product configuration rather than assumed.

A professional lifting evaluation should identify the full load path:

Each component in that chain must be suitable for the actual lifting operation.

What Materials Can the Slab Lifter(5T)-E Handle?

The model is designed as a heavy lifting attachment for compatible slab and industrial material-handling applications.

Potential applications may include suitable:

• stone slabs,
• steel plates or slab-type materials,
• fabricated panels,
• industrial components,
• and other compatible loads within the approved lifting configuration.

Material name alone does not determine suitability. Actual load weight, dimensions, center of gravity, lifting points, surface condition, and the selected lifting accessories must all be considered.

Slab Lifter vs Slab Lifting Clamp

The term “slab lifter” can describe different lifting technologies. Buyers should not assume that every slab lifter physically grips the slab.

For direct slab-gripping equipment, buyers can also review the Speedone Clamp Lifters range.

Параметры настройки

The supplied specification confirms that OEM and ODM services are acceptable, with a minimum order quantity of 1 set.

Color customization is also available in addition to the standard green finish.

For project-specific orders, useful information includes:

• forklift make and model,
• fork dimensions,
• maximum load weight,
• load dimensions,
• required lifting height,
• lifting-point arrangement,
• operating environment,
• required color,
• and order quantity.

Pre-Use Inspection Checklist

Before each lifting operation, check the complete lifting system rather than only the attachment body.

• Confirm the actual load weight.
• Confirm that the load is within the approved lifting configuration.
• Inspect the steel attachment for visible deformation or damage.
• Inspect load-bearing welds and structural connections.
• Inspect the forklift mounting or fork interface.
• Confirm the attachment retention system is correctly installed.
• Inspect lifting points, hooks, slings, chains, or other accessories where used.
• Verify the forklift capacity and load-center condition.
• Check that the load is balanced and correctly connected.
• Confirm adequate lifting and overhead clearance.
• Keep personnel away from suspended loads and potential fall areas.
• Avoid shock loading, sudden movement, or uncontrolled swinging.
• Stop operation if deformation, cracking, loose connections, or abnormal movement is observed.

Common Buyer Mistakes

Confusing 20 kg with Lifting Capacity

The 20 kg figure is the attachment weight. The published lifting-capacity figure is 5T.

Assuming a 5T Attachment Means Every Forklift Can Lift 5T

The complete forklift-and-attachment capacity depends on the actual forklift, attachment geometry, load center, lift height, and suspended-load configuration.

Buying Without Checking Fork Dimensions

The mounting system must physically match the forklift. Nominal forklift tonnage alone does not prove compatibility.

Assuming “Slab Lifter” Means a Mechanical Clamp

The exact load-engagement system should be confirmed. Forklift lifting attachments, beams, hooks, and mechanical slab clamps are different product types.

Choosing by Color

Green is a product-color specification, not evidence of environmental performance or lifting capability.

Assuming Steel Automatically Means Corrosion Resistant

Corrosion performance depends on the actual surface treatment and operating environment. Confirm the current finish where corrosion resistance is important.

What Information Should You Provide Before Ordering?

Packing, Shipping and Support

The Slab Lifter(5T)-E has a published equipment weight of 20 kg and is shipped from Сямынь.

The supplied commercial terms include:

• MOQ: 1 set,
• OEM / ODM: acceptable,
• payment terms: 30% deposit with balance before shipping,
• and online after-sales support.

Final package dimensions, gross weight, packing method, and shipping quantity should be confirmed according to the current order configuration.

Часто задаваемые вопросы

Какая грузоподъёмность у подъёмника для плит Speedone (5T)-E?

Заявленная грузоподъёмность составляет 5 т. Точные номинальные рабочие условия следует уточнить в текущей технической спецификации Speedone.

Сколько весит подъёмник для плит (5T)-E?

The published equipment weight is 20 kg. This is the attachment’s own weight, not its lifting capacity.

Значит ли 5-тонный плитолифт, что каждый вилочный погрузчик может поднимать 5 тонн?

No. Complete usable capacity depends on the forklift capacity, attachment weight, load center, lifting geometry, lift height, and actual suspended-load configuration.

Как Slab Lifter (5T)-E крепится к вилочному погрузчику?

The supplied specification does not define the exact fork-interface and retention system. Buyers should confirm fork-pocket or mounting dimensions, fork compatibility, and locking method from the current technical drawing.

Какой размер вилки требуется?

The required fork dimensions are not specified in the supplied product information. Provide the actual forklift fork width, thickness, and length for compatibility confirmation.

Является ли захват для плит (5T)-E зажимом?

The supplied information describes it as forklift lifting equipment / a slab lifter, but it does not define a mechanical gripping mechanism. The exact load-engagement system should be confirmed rather than assuming it functions as a slab clamp.

Можно ли заказать продукт другого цвета?

Yes. Green is the published standard color and customization is available.

Принимает ли Speedone заказы OEM и ODM?

Yes. The supplied product specification states that OEM and ODM are acceptable, with an MOQ of 1 set.

What should I inspect before using the attachment?

Inspect the structure, load-bearing connections, forklift interface, attachment retention, lifting points, hooks or slings where applicable, and verify the complete forklift-and-load capacity before lifting.

What information should I send before requesting a quotation?

Provide the forklift model, rated capacity, fork dimensions, maximum load weight, load dimensions, required lifting height, intended lifting arrangement, application, and customization requirements.

For additional forklift-mounted lifting equipment, review the Speedone Forklift Lifting Equipment range, или contact Speedone with your forklift model, fork dimensions, load weight, and lifting requirements.