בצע את העבודה שלך ביעילות!

Stone Splitting Press Manufacturer for Granite & Marble | Speedone

  • משקל : 2.5T
  • Pressure : 150T
  • Power : 11KW

תיאור המוצר

Hydraulic Stone Splitting Press for Granite, Marble & Large Stone Blocks

סיכום سريع:
ה-Speedone stone splitting press is designed for professional stone factories that need a rigid hydraulic machine for splitting granite, marble and other suitable natural stone. Compared with smaller compact splitters, this heavy-duty configuration provides a large structural frame, broad working table and strong workpiece support for larger or thicker stone. The correct machine should be selected according to stone type, dimensions, weight, required finished product, working opening, tooling and hydraulic capacity.

What Is a Stone Splitting Press?

stone-splitting-press-speedone stone-splitting-press-for-granite
Product display and finished product display

א stone splitting press is heavy-duty stone-processing equipment that uses concentrated hydraulic force to fracture natural stone along a selected splitting line.

The word press is important because this type of machine places more emphasis on the complete structural system.

The main working elements include:

  • Rigid machine frame
  • Hydraulic cylinder
  • Splitting head
  • Splitting tools
  • Working table
  • Stone support system
  • Hydraulic power unit

These components work together to carry and control the mechanical load created during stone splitting.

The process is different from diamond sawing.

A diamond saw removes material and produces a controlled cut. A hydraulic splitting press concentrates force into the stone until a natural fracture develops.

This makes the machine suitable for products such as:

  • Natural-face granite
  • Marble split-face products
  • Building stone
  • Wall stone
  • Landscape stone
  • Paving stone
  • Stone blocks
  • Architectural stone
  • Selected products made from suitable stone offcuts

The machine should therefore be evaluated as a complete hydraulic and structural system rather than only by maximum tonnage.

Speedone Heavy-Duty Stone Splitting Press Structure

The Speedone machine shown for this application has a heavier structure than compact standalone splitters designed for smaller stone pieces.

Its large frame and broad working area make it more suitable for buyers processing larger, thicker or heavier natural stone.

Large Portal-Style Machine Frame

The main machine body forms a tall rigid structure around the working opening.

Large side members support the upper hydraulic assembly and transfer the splitting load toward the lower machine base.

Frame rigidity matters because the machine must remain aligned while substantial hydraulic force is applied.

Upper Hydraulic Splitting Assembly

The upper working assembly is positioned above the stone.

Hydraulic force is transferred through this section into the splitting tools.

Depending on the application, the machine may use different approved tool configurations.

Wide Working Table

The machine includes a broad lower worktable that provides support for larger stone pieces.

A wider working platform can be useful when processing:

  • Large granite blanks
  • Thick marble pieces
  • Building-stone blocks
  • Landscape stone
  • Large paving blanks

Spring-Supported Lower Platform

The machine configuration shown includes visible spring supports beneath the working platform.

This support system forms part of the lower working structure and should be evaluated together with the approved splitting configuration.

Independent Hydraulic Power Unit

A separate hydraulic power section is positioned beside the main press.

This unit provides the hydraulic pressure required for the splitting cycle.

Exact pump power, oil capacity, motor specification and operating pressure depend on the selected machine model.

Reinforced Floor Base

The machine uses a substantial floor-standing base.

This is important for a heavy splitting press because the machine structure and installation area must support repeated hydraulic loads during production.

How Does a Hydraulic Stone Splitting Press Work?

A typical splitting cycle is:

Inspect Stone → Load → Support → Position → Align → Apply Hydraulic Force → Split → Release → Remove → Inspect

1. Inspect the Stone

Check the workpiece for serious cracks, unstable areas and visible defects.

2. Load the Workpiece

Place the stone onto the working table using suitable handling equipment where required.

3. Support the Stone

Make sure the workpiece is stable before force is applied.

4. Align the Splitting Line

Position the required fracture area beneath the splitting tools.

5. Apply Hydraulic Force

The upper splitting assembly moves toward the stone and transfers concentrated force through the tooling.

6. Complete the Split

When the internal stress becomes greater than the stone can resist, the material fractures.

7. Remove and Inspect

After the machine returns to the approved unloading position, remove the finished pieces and check the fracture quality.

The final split can be influenced by:

  • Stone type
  • Stone strength
  • Workpiece width
  • Stone thickness
  • Natural grain
  • Bedding direction
  • Veins
  • Existing cracks
  • Stone orientation
  • Splitting-tool geometry
  • Workpiece support
  • Hydraulic force

Natural stone is not completely uniform, so the machine can control the applied force but cannot remove all material-related variation.

Why Use a Heavy-Duty Stone Splitting Press?

A hydraulic splitting press becomes useful when the stone requires more structural support and controlled force than a small compact machine can provide.

Potential advantages include:

  • Heavy-duty frame construction
  • Controlled hydraulic splitting force
  • Large working opening
  • Support for larger stone pieces
  • Natural split-face production
  • Reduced dependence on manual hammering
  • Repeatable factory processing
  • Potential integration into a broader production workflow

The most important purchasing question is not simply:

How much force can the machine produce?

A more useful question is:

Does the frame, working opening, tooling and worktable match the actual stone being processed?

stone-splitting-press-manufacturer hydraulic-stone-splitting-press
Product information parameter table and size annotations

Stone Splitting Press for Granite

Granite is one of the main materials processed with heavy hydraulic splitting equipment.

Its strength makes it suitable for many outdoor and architectural products.

Possible granite products include:

  • Building stone
  • Natural wall stone
  • Landscape blocks
  • Paving stone
  • Natural-face slabs
  • Architectural pieces

Granite characteristics can vary according to quarry source, mineral composition and grain size.

A practical machine-selection process is:

Granite Type → Input Dimensions → Finished Product → Required Force → Working Opening → Splitting Press

Factories requiring more emphasis on automatic cycles and material flow can also compare Speedone’s automatic stone splitter for granite and marble.

Stone Splitting Press for Marble

Suitable marble can also be processed with hydraulic splitting presses.

However, marble often contains veins and directional structures that influence fracture behavior.

Important factors include:

  • Marble type
  • Vein direction
  • Stone thickness
  • Stone width
  • Desired split-face appearance
  • Workpiece orientation

The stone should therefore be positioned according to both its dimensions and natural structure.

Stone Splitting Press for Large Stone Blocks

Large stone pieces are one of the main reasons to choose a heavier press structure.

Compared with a compact splitter, a heavy-duty press may provide:

  • A larger working opening
  • More substantial workpiece support
  • Greater structural rigidity
  • Space for thicker stone
  • A more suitable platform for heavy blanks

Exact maximum dimensions and weight should always be confirmed for the selected machine.

Machine appearance alone should not be used to estimate capacity.

Stone Splitting Press for Building Stone

Building-stone factories often process natural stone into products that retain a fractured surface.

Typical applications include:

  • Wall stone
  • Retaining-wall blocks
  • Facade stone
  • Landscape stone
  • Architectural masonry

A typical workflow is:

Raw Stone → Sawing or Pre-Sizing → Hydraulic Splitting Press → Inspection → Sorting → Packing

The pre-sizing stage creates the basic dimensions.

The splitting press then creates the natural fractured finish.

Stone Splitting Press for Paving Stone

Suitable hydraulic presses can also process prepared paving blanks where a natural fractured finish is required.

Possible products include:

  • Granite paving stone
  • Natural-face pavers
  • Courtyard stone
  • Garden paving
  • Landscape paving
  • Plaza stone

If the desired paving product requires a mould-defined shape or decorative pattern instead of a natural fracture, Speedone’s paving stone stamping machine is a more suitable option.

Stone Splitting Press for Natural Split-Face Products

A natural split face is created by fracture rather than by cutting or grinding the final visible surface.

The resulting face may show:

  • Natural mineral structure
  • Stone grain
  • Irregular relief
  • Shadow depth
  • Rustic texture

Typical applications include:

  • Building facades
  • Retaining walls
  • Garden walls
  • Architectural cladding
  • Landscape structures
  • Interior feature walls

Stone Splitting Press vs. Automatic Stone Splitter

The two machine categories overlap, but the buying priorities are different.

Factor Stone Splitting Press Automatic Stone Splitter
Main Focus Heavy structure and splitting force Cycle automation and production flow
Large Stone Strong application Model-dependent
Automatic Feeding Configuration-dependent More common as an upgrade
Frame Emphasis גבוה משתנה לפי הדגם
Production-Line Integration Possible Stronger focus

Stone Splitting Press vs. Stone Pressing Machine

The names are similar, but the finished-product objective is different.

א stone splitting press uses hydraulic pressure to create a fracture.

A stone pressing machine normally uses moulds or defined tooling to create a shaped or decorative product.

מאפיין Stone Splitting Press Stone Pressing Machine
Main Process Natural fracture Mould pressing
Finished Surface Natural split Tool-defined
Large Blocks Strong application Application-dependent
Decorative Patterns Limited Strong application

Factories looking for mould-based forming can review Speedone’s stone pressing machine for granite and marble.

Stone Splitting Press vs. Stone Stamping Machine

Both machine types may use hydraulic pressure, but they create different products.

Splitting Press = Natural Fracture
Stamping Machine = Mould-Defined Shape or Pattern

For decorative granite and marble stamping applications, Speedone’s hydraulic stone stamping machine provides a more relevant overview.

Stone Splitting Press vs. Granite Stamping Machine

Granite can be processed by splitting or stamping depending on the required product.

A granite splitting press is more suitable for:

  • Natural-face granite
  • Building stone
  • Wall stone
  • Natural paving
  • Landscape stone

A granite stamping machine is more suitable for:

  • Patterned pavers
  • Decorative granite products
  • Mould-defined shapes

For those mould-defined applications, see Speedone’s granite stamping machine for pavers.

Stone Splitting Press vs. Narrow Stone Trimming Machine

Not every stone-processing application requires a large wide-frame press.

A narrower trimming machine may be more suitable for:

  • Mushroom-face trimming
  • Wall-stone edge dressing
  • Localized stone trimming
  • Long narrow workpieces

For these applications, Speedone’s natural stone splitter and mushroom-face trimming alternative focuses on a narrower processing configuration.

Stone Splitting Press vs. Diamond Saw

Hydraulic splitting and diamond sawing perform different jobs and are often used together.

מאפיין Stone Splitting Press Diamond Saw
Process Hydraulic fracture Cutting
Surface Natural split Saw-cut
Dimensional Precision האפליקציה הטובה ביותר Higher
Natural Texture Strong Limited

A typical factory workflow is:

Raw Stone → Sawing → Prepared Blank → Stone Splitting Press → Natural-Face Product

Stone Splitting Press for Stone Offcuts

Stone factories can generate usable leftover material during slab cutting and dimensional processing.

Selected structurally sound offcuts may be converted into:

  • Small wall stone
  • Landscape stone
  • Natural-face paving
  • Decorative building stone

A possible workflow is:

Stone Offcut → Inspection → Pre-Sizing → Hydraulic Splitting → Sorting → Secondary Product

Pieces with major cracks or unstable geometry should be rejected before processing.

Why Frame Rigidity Matters

A stone splitting press generates substantial force between the upper hydraulic assembly and the workpiece.

The machine frame must support this force while maintaining alignment.

Important structural areas include:

  • Main vertical frame
  • Upper cylinder support
  • Splitting-head guides
  • Lower working table
  • Floor base
  • Side reinforcement

For large or thick stone, hydraulic capacity and frame structure should always be considered together.

Why the Wide Working Table Matters

A broad working table can provide more support than a small compact splitter.

This can be useful when handling:

  • Wide granite blanks
  • Large building-stone pieces
  • Thick natural stone
  • Irregular workpieces

Worktable dimensions should be compared with both the typical and maximum stone dimensions used in daily production.

Why Workpiece Support Matters

Large stone must remain stable while hydraulic force is applied.

Poor support may contribute to:

  • Unexpected fracture direction
  • Excessive edge breakage
  • Uneven tool contact
  • Unstable workpieces
  • Inconsistent finished products

The worktable, lower support system and splitting tools should therefore be treated as one complete working system.

How Much Force Does a Stone Splitting Press Need?

There is no single hydraulic-force rating suitable for every stone.

The required capacity depends on:

  • Stone type
  • Stone strength
  • Workpiece width
  • Stone thickness
  • Grain structure
  • Splitting-tool design
  • Required finished product

A practical selection sequence is:

Material → Dimensions → Finished Product → Required Force → Working Opening → Machine

Choosing a larger press only because it has a higher nominal force does not automatically improve the finished result.

Stone Splitting Press Working Width

Working width determines how wide the stone can be inside the active splitting zone.

When requesting a quotation, provide:

Typical Working Width + Maximum Working Width

The typical daily width is especially important because it represents normal production.

Stone Splitting Press Working Height

Working height determines the maximum stone thickness or block height that can enter the splitting opening.

Provide:

Typical Stone Height + Maximum Stone Height

Working height should be considered together with hydraulic capacity, stone weight and loading method.

Stone Splitting Tool Design

The splitting tool determines how hydraulic force reaches the stone.

Depending on machine configuration, approved tooling may include:

  • Continuous splitting blades
  • Segmented tools
  • Individual teeth
  • Multi-point splitting heads

The correct tooling depends on stone shape, surface condition and desired fracture.

Standalone Stone Splitting Press vs. Production Line

Factor Standalone Press Integrated Splitting Line
Initial Investment נמוך Higher
Product Flexibility Higher More standardized
Material Feeding Manual or assisted Can be integrated
Large Stone Flexibility Strong Depends on line design
Output Potential Application dependent Higher for repetitive products

Planning a Heavy Stone Splitting Workflow

A factory processing larger natural stone may use a workflow such as:

Raw Stone Storage → Sawing → Block Preparation → Material Handling → Stone Splitting Press → Inspection → Sorting → Packing

The splitting press is only one part of the complete process.

Total production may also be limited by:

  • Slow stone preparation
  • Heavy-piece loading
  • Workpiece positioning
  • Finished-product removal
  • Sorting
  • אריזה

For heavy stone, material handling can be just as important as the splitting cycle itself.

How to Choose the Right Stone Splitting Press

1. Define the Stone Material

Specify granite, marble, limestone, sandstone or another suitable natural stone.

2. Define Typical Workpiece Dimensions

Normal daily production dimensions should guide machine selection.

3. Define Maximum Stone Dimensions

Provide the largest routine workpiece rather than only an exceptional oversized piece.

4. Define Stone Weight

Heavy workpieces may require forklifts, cranes or other loading equipment.

5. Define the Finished Product

Clarify whether you produce building stone, wall stone, pavers, blocks or natural split-face products.

6. Define the Required Working Opening

Both working width and height should match the material being processed.

7. Match Hydraulic Capacity

Required force should be based on stone characteristics and dimensions.

8. Evaluate Splitting Tooling

Tool design strongly influences how the fracture starts and develops.

9. Evaluate Worktable Support

Large and irregular workpieces need adequate support.

10. Define Production Requirements

Estimate realistic output per shift.

11. Plan Material Handling

Consider forklifts, cranes, roller systems or other suitable handling equipment where required.

12. Evaluate Supplier Support

Technical documentation, spare-parts support and application communication are important for heavy industrial machinery.

Information to Send Speedone for a Quotation

To help Speedone evaluate a suitable stone splitting press, provide:

  1. Stone material
  2. Raw-stone photographs
  3. Typical stone width
  4. Maximum stone width
  5. Typical stone height or thickness
  6. Maximum stone height or thickness
  7. Approximate workpiece weight
  8. Required finished-product dimensions
  9. Finished-product photographs
  10. Required production volume
  11. Current processing method
  12. Preferred loading method
  13. Factory voltage and frequency
  14. Available installation area
  15. Production-line integration requirements, if any

Raw-material and finished-product photos are especially useful because they show the stone shape and desired result more clearly than dimensions alone.

Need Help Choosing a Stone Splitting Press?Send Speedone your stone type, typical and maximum dimensions, approximate workpiece weight, finished-product photos and required output. For larger or heavier stone, also provide your current loading method and available factory space so the working opening, table support and machine configuration can be evaluated together.

Common Stone Splitting Press Problems

Stone Fractures in the Wrong Direction

Natural grain, veins, bedding and existing cracks may redirect the fracture.

Excessive Edge Chipping

Check stone condition, positioning, tool contact and tooling geometry.

Uneven Tool Contact

Inspect the stone surface, workpiece support and splitting-head configuration.

The Press Seems to Require More Force

Confirm that the workpiece is within the approved machine range and do not exceed manufacturer-rated hydraulic settings.

Large Workpieces Feel Unstable

Review the working-table support and loading method before continuing production.

Production Is Slower Than Expected

Measure loading, positioning, splitting, unloading, sorting and packing separately to identify the actual bottleneck.

Stone Splitting Press Maintenance

Routine inspection should include:

  • Hydraulic oil
  • Hydraulic cylinder
  • Hydraulic pump
  • Electric motor
  • Hydraulic hoses
  • Fittings
  • Control valves
  • Pressure-control components
  • Splitting head
  • Splitting tools
  • Tool guides
  • Working table
  • Spring-supported components
  • Main machine frame
  • Reinforced base
  • Electrical controls
  • Safety systems

Hydraulic leaks should be investigated promptly.

Damaged hoses or splitting tools should not remain in operation.

Maintenance should follow the technical documentation supplied with the specific Speedone machine.

Stone Splitting Press Safety

A heavy hydraulic splitting press generates substantial mechanical force and may process large, heavy stone pieces.

Only trained personnel should operate or maintain the equipment.

  • Inspect the machine before operation.
  • Inspect every workpiece before loading.
  • Keep hands away from the splitting area.
  • Make sure the stone is properly supported.
  • Use suitable lifting equipment for heavy workpieces.
  • Do not bypass guards or safety controls.
  • Inspect hydraulic hoses regularly.
  • Wear appropriate personal protective equipment.
  • Keep unauthorized personnel away from the press area.
  • Follow lockout procedures during maintenance.
  • Do not exceed approved workpiece dimensions.
  • Do not exceed manufacturer-rated hydraulic settings.
  • Replace damaged tooling before continued operation.

Who Uses Stone Splitting Presses?

Professional hydraulic splitting presses may be suitable for:

  • Granite processing factories
  • Marble processing factories
  • Building-stone producers
  • Natural stone quarries
  • Wall-stone manufacturers
  • Landscape-stone suppliers
  • Paving-stone factories
  • Architectural stone companies
  • Dimension-stone processors
  • Stone machinery distributors

למה לבחור ב-Speedone?

Speedone supplies professional equipment for stone processing, handling and installation.

When selecting a stone splitting press, buyers should compare the complete working system rather than only maximum hydraulic force.

A practical selection process is:

Stone Material → Input Dimensions → Workpiece Weight → Finished Product → Required Force → Working Opening → Tooling → Material Handling

Also consider:

  • Main press-frame rigidity
  • Hydraulic power system
  • Splitting-head configuration
  • Working-table dimensions
  • Workpiece support
  • Machine installation requirements
  • Loading method
  • Spare-parts availability
  • Technical documentation
  • Supplier communication
Final Note:
The correct stone splitting press should be selected around the actual stone dimensions, weight and finished-product requirement rather than maximum hydraulic tonnage alone. For large granite, marble and building-stone pieces, frame rigidity, working opening, worktable support and material handling can be just as important as splitting force.

שאלות נפוצות

What is a stone splitting press?

A stone splitting press is heavy-duty hydraulic equipment that applies concentrated force through splitting tools to fracture suitable natural stone into building, paving, wall or split-face products.

Is a stone splitting press hydraulic?

Industrial stone splitting presses commonly use hydraulic power because it provides strong and controllable linear splitting force.

Can a stone splitting press process granite?

Suitable machines can process compatible granite when the workpiece dimensions and material characteristics remain within the approved working range.

Can it split marble?

Suitable marble can be hydraulically split, although natural veins and stone structure may influence the fracture direction.

Can a stone splitting press process large blocks?

Heavy-duty presses can be configured for larger stone pieces, but maximum working width, height, weight and hydraulic capacity depend on the selected model.

What is the difference between a stone splitting press and an automatic stone splitter?

A stone splitting press places more emphasis on heavy frame structure, working opening and workpiece support, while an automatic stone splitter places more emphasis on cycle automation and material flow.

What is the difference between a stone splitting press and a stone pressing machine?

A splitting press creates a natural fracture, while a stone pressing machine generally uses mould-based tooling to create a defined decorative or shaped product.

Can the machine produce paving stone?

Suitable splitting presses can process prepared paving blanks when natural fractured paving products are required.

Can stone offcuts be processed?

Selected structurally sound offcuts may be suitable after inspection and pre-sizing when they remain within the machine’s working range.

How much hydraulic force is required?

The required force depends on stone type, strength, width, thickness, tooling and finished-product requirements.

Why is the machine frame important?

The press frame carries the mechanical load generated during splitting and helps maintain alignment between the hydraulic assembly, tooling and stone.

What information should I provide for a quotation?

Provide the stone material, raw-stone photos, typical and maximum dimensions, approximate workpiece weight, required finished product, production target, loading method, factory power supply and installation area.


מה עוד?



    השאר הודעה



      העגלה שלך