Speedone 5T Slab Lifter for Stone Handling
The Speedone 5T slab lifter is a lifting accessory intended for industrial slab-handling applications. Model Slab Lifter (5T)-E has a published load-bearing specification of 5T and is offered in green or customized colors.
The original product specification identifies stainless steel as the construction material and lists a net weight of 20 kg. The product is supplied as a lifting accessory rather than a complete forklift or crane.
For professional procurement, the most important considerations are the approved lifting configuration, equipment connection, applicable load limit and suitability for the actual stone slab being handled. These details should be confirmed from the current product drawing and operating instructions before selecting the equipment.
Slab Lifter (5T)-E Technical Specifications
| Specification | Published Details |
|---|---|
| Brand | Speedone |
| Model | Slab Lifter (5T)-E |
| Product Type | Industrial Slab-Lifting Accessory |
| Published Load-Bearing Capacity | 5T |
| Material Listed in Original Specification | Stainless Steel |
| Net Weight | 20 kg |
| Color | Green / Customized |
| Condition | New |
| Packing Size | 130 × 10 × 10 cm |
| Published Gross Weight | 20 kg; confirm actual packed weight before shipment |
| Place of Origin | Fujian, China |
| Applicable Industries | Building Material Shops, Machinery Repair Shops and Other Industrial Applications |
| Minimum Order Quantity | 1 Set |
| OEM / ODM | Available upon confirmation of project requirements |
| Shipping Port | Xiamen, China |
What Is the Speedone 5T Slab Lifter?
The Speedone Slab Lifter (5T)-E is described in the supplied product information as a lifting accessory for heavy slab-handling work.
Its role should be distinguished from the lifting machine used with it. A slab lifter is an accessory, while a forklift or crane provides the lifting movement and must be suitable for the attachment and intended load.
The original product description uses the terms “crane boom” and “lift beam,” but the supplied technical table does not establish whether these are separate structural components of the Slab Lifter (5T)-E or references to other equipment used in the same lifting operation.
For that reason, buyers should confirm the actual product structure and connection arrangement from the current engineering drawing rather than assuming that the supplied item includes a crane boom or a complete lifting beam assembly.
What Does the Published 5T Capacity Mean?
The product specification lists 5T under “Load-bearing.” This is an important purchasing parameter, but it should be connected to the exact conditions under which the product is intended to operate.
Before using the lifter, confirm the following information:
- Whether 5T applies to the complete accessory or a specific lifting position.
- The approved connection and lifting arrangement.
- The permitted lifting direction and operating angle.
- The allowable slab dimensions and load distribution.
- Whether the rating changes with different configurations or customized components.
- The manufacturer’s inspection and operating requirements.
Why the Complete Lifting System Matters
The rated capacity of the lifting accessory is not the same as the rated capacity of the complete lifting system.
If the accessory is used with a crane, the crane, hook, rigging and lifting connections must be appropriate for the complete suspended load and operating conditions.
If an approved forklift-mounted configuration is available, the forklift’s permitted capacity must be evaluated with the attachment installed. Attachment weight, load position and the forklift manufacturer’s requirements can affect the usable lifting capacity.
The current supplied product data does not establish that every forklift or crane can use this accessory at its published 5T load-bearing value.
Stainless Steel Construction and Product Weight
The original technical specification lists Stainless Steel as the material and 20 kg as the product weight.
These values can help buyers identify the published product configuration, but the current source does not specify the stainless steel grade, structural section dimensions, wall thickness, weld specification or surface-treatment requirements.
For projects that require a particular corrosion-resistance level or engineering specification, buyers should request the material grade and applicable manufacturing details before placing an order.
The 20 kg published weight is also relevant when evaluating the complete lifting arrangement. The lifting system must account for the lifting accessory as well as the material and any additional rigging or connection hardware.
Lifting Connection and Equipment Compatibility
Connection compatibility is one of the most important points to confirm when purchasing Slab Lifter (5T)-E.
The supplied technical table does not identify the exact lifting interface, including whether the product uses a lifting eye, hook connection, shackle interface, fork-mounted connector or another arrangement.
Before ordering, provide Speedone with the following:
- The crane or forklift model intended for the application.
- The existing lifting connection dimensions.
- The maximum material weight.
- The slab dimensions and intended handling orientation.
- The available lifting height and working clearance.
- The required loading, lifting and placement procedure.
Use the current product drawing to confirm whether the selected machine and the Slab Lifter (5T)-E can be assembled into an approved lifting system.
Suitable Stone-Handling Applications
Depending on its verified connection arrangement, permitted load conditions and the equipment used with it, the Slab Lifter (5T)-E may be considered for industrial slab-handling operations in:
- Stone processing factories.
- Granite and marble workshops.
- Building-material facilities.
- Stone storage and material-handling areas.
- Industrial facilities requiring compatible slab-lifting accessories.
The current product information does not identify a specific gripping mechanism or confirmed compatibility with every stone material, thickness or surface finish. Buyers should therefore confirm the approved slab contact and restraint arrangement for their intended application.
5T Slab Lifter vs Forklift Boom vs Lifting Beam
These product terms describe different functions and should not be used interchangeably.
| Equipment | General Function | Selection Consideration |
|---|---|---|
| Slab Lifter | An accessory designed for a specified slab-handling arrangement. | Confirm the actual lifting, connection and slab-restraint mechanism. |
| Forklift Boom | A forklift attachment that provides an extended lifting point. | Confirm forklift compatibility, attachment rating and load-center effects. |
| Lifting Beam | A structural lifting device used with a defined lifting-point arrangement. | Confirm lifting-point positions, rigging angles and load distribution. |
The correct product should be selected according to its actual structure and approved operating configuration, rather than assuming that a slab lifter, forklift boom and lifting beam are identical devices.
Pre-Use Inspection Checklist
Before using any lifting accessory, the operator should follow the manufacturer’s instructions and the applicable lifting-equipment requirements for the approved configuration.
- Confirm the product model and its applicable load rating.
- Inspect the lifter for deformation, cracks or impact damage.
- Inspect welds and structural connection areas.
- Check the lifting connection and any required hooks, shackles or rigging.
- Confirm that all required retaining and locking components are correctly installed.
- Verify the planned load weight, dimensions and center of gravity.
- Confirm that the crane or forklift is suitable for the complete lifting arrangement.
- Check that the slab is supported or restrained according to the approved procedure.
- Confirm that personnel remain clear of the suspended load and potential fall zone.
- Remove damaged or incorrectly assembled equipment from service until properly evaluated.
Common Buyer Mistakes
Assuming the Product Is a Complete Forklift
The Slab Lifter (5T)-E is presented as a lifting accessory, not a complete forklift. The lifting machine and its compatibility requirements must be considered separately.
Assuming the 5T Figure Applies to Every Operating Configuration
The published 5T load-bearing specification does not define every possible connection, load position or operating condition. The actual approved configuration must be verified.
Assuming All Cranes and Forklifts Are Compatible
Compatibility depends on the actual lifting interface, machine capacity, attachment weight and intended load configuration.
Confusing Stainless Steel with a Verified Material Grade
The supplied specification lists stainless steel but does not identify its exact grade. Buyers requiring a particular material specification should confirm the grade before ordering.
Ignoring the Difference Between Net and Gross Weight
The original source lists 20 kg for both the product weight and packaged gross weight. Confirm the final packed weight and shipping dimensions in the quotation or packing list.
Assuming the Product Includes a Separate Crane Boom
The original product title refers to a crane boom and lifting beam, but the provided specifications do not establish the included components. Confirm the exact supply scope with Speedone.
Customization, Packaging and Ordering
The supplied product information lists Green / Customized color options and states that OEM and ODM requirements can be discussed.
Structural changes, alternative lifting connections or other engineering modifications should be evaluated separately because they may affect the approved load-bearing configuration.
| Ordering Item | Published Information |
|---|---|
| Minimum Order Quantity | 1 Set |
| Packing Size | 130 × 10 × 10 cm |
| Published Gross Weight | 20 kg; confirm final packing list |
| Shipping Port | Xiamen, China |
| Published Payment Terms | 30% deposit; balance before shipping, subject to the current quotation |
What Information Should Buyers Provide Before Ordering?
Providing complete application details helps Speedone confirm the appropriate product configuration and avoid mismatched lifting equipment.
| Information | What to Provide |
|---|---|
| Material | Granite / marble / other material |
| Slab Dimensions | Length × width × thickness |
| Maximum Slab Weight | kg or tons per slab |
| Lifting Equipment | Crane / forklift and exact model |
| Connection Requirements | Hook, shackle, lifting-point or other relevant interface dimensions |
| Handling Method | Required lifting direction, slab orientation and placement procedure |
| Customization | Color, connection design or other project-specific requirements |
Frequently Asked Questions
What is the published capacity of the Speedone 5T slab lifter?
The supplied product specification lists a 5T load-bearing capacity for model Slab Lifter (5T)-E. The exact approved operating conditions and load configuration should be confirmed from the current technical documentation.
What is the model number?
The published model number is Slab Lifter (5T)-E.
How much does the slab lifter weigh?
The supplied specification lists a product weight of 20 kg.
What material is the slab lifter made from?
The supplied technical table identifies stainless steel as the material. The exact stainless steel grade should be confirmed if a specific material standard is required.
Can the slab lifter be used with a forklift?
The original product description refers to forklift lifting equipment, but the supplied specification does not define the forklift connection or approved forklift models. Compatibility must be confirmed for the actual attachment and forklift configuration.
Can the slab lifter be used with a crane?
The original product description refers to crane lifting equipment, but the exact lifting connection and approved crane configuration are not provided. Confirm these details before use.
Does this product include a crane boom or lifting beam?
The supplied product specification does not provide a complete component list. Buyers should confirm exactly which parts are included in the Slab Lifter (5T)-E set.
What color options are available?
The published options are green or customized color.
What is the packing size?
The supplied product information lists a single-package size of 130 × 10 × 10 cm.
Can Speedone provide OEM or ODM customization?
The supplied product information states that OEM and ODM services are available. Any structural or lifting-connection modifications should be reviewed against the applicable load requirements.
What is the minimum order quantity?
The published minimum order quantity is one set.
Expert Commentary & Analysis
The Speedone Slab Lifter (5T)-E has several useful published product facts: a 5T load-bearing specification, 20 kg product weight, stainless steel material listing, green/customized colors and a 130 × 10 × 10 cm packing size.
For a technical buyer, the main missing information is not another general description of lifting efficiency. It is the actual product structure, approved lifting connection, 5T load-rating conditions and compatibility with the intended lifting machine.
Providing a dimensioned engineering drawing, real connection photographs and a manufacturer-issued load specification would make the page more useful for product selection and reduce ambiguity between a slab lifter, forklift boom and lifting beam.
Buyer takeaway: evaluate Slab Lifter (5T)-E by its confirmed lifting mechanism, approved load rating, attachment interface, actual slab dimensions and complete lifting-system requirements.
