Krijg je werk efficiënt gedaan!

Stone Pressing Machine Manufacturer for Granite & Marble | Speedone

  • Gewicht : 0.95T
  • Pressure : 60T
  • Power : 4KW

Product Beschrijving


Hydraulic Stone Pressing Machine for Granite, Marble & Decorative Pavers

Korte samenvatting:
De Speedone stone pressing machine is designed for professional stone factories processing prepared granite, marble and other suitable stone blanks. Hydraulic force is transferred through approved moulds or tooling to create decorative pavers, patterned stone and other pressed stone products. The correct machine should be selected according to stone type, blank dimensions, finished-product design, mould size, working area and required production output.

What Is a Stone Pressing Machine?

Product display and product finished product display

A stone pressing machine is industrial equipment that uses controlled mechanical force to press prepared stone blanks against suitable moulds, dies or tooling.

Industrial models commonly use hydraulic power because it provides strong and controlled vertical movement throughout the pressing cycle.

Depending on the stone, tooling and machine configuration, the equipment may be used to produce:

  • Decorative paving stone
  • Patterned granite pavers
  • Marble decorative products
  • Garden paving
  • Landscape stone pieces
  • Architectural decorative stone
  • Selected products made from suitable stone offcuts

The machine should not be selected simply by maximum hydraulic force.

The finished product depends on the complete combination of:

  • Stone material
  • Blank dimensions
  • Stone thickness
  • Mould geometry
  • Tooling contact
  • Workpiece support
  • Hydraulic force

Speedone Stone Pressing Machine Configuration

The Speedone machine shown for this application uses a vertical hydraulic press configuration with a dedicated working area.

Vertical Hydraulic Cylinder

The hydraulic cylinder is positioned above the pressing head.

It converts hydraulic pressure into the vertical movement required for the pressing cycle.

Four-Column Supporting Structure

The upper pressing assembly is guided by multiple vertical columns surrounding the working area.

This structure helps keep the hydraulic cylinder, upper pressing assembly, tooling and lower worktable aligned during operation.

Pressing Head

The pressing head transfers force from the hydraulic system toward the mould and stone blank.

Correct alignment is important because uneven contact can affect both the finished product and tooling wear.

Open Working Table

The lower work area provides access for:

  • Loading prepared stone blanks
  • Positioning the workpiece
  • Aligning moulds or tooling
  • Inspecting the working area
  • Removing finished products

Tooling and Fixture Area

The lower working area supports the mould, die or other approved tooling required for the finished product.

The exact tooling arrangement should be selected according to the required stone shape or pattern.

Machine Controls

The machine includes operating controls for managing the approved pressing cycle.

Exact hydraulic force, stroke, working dimensions and machine capacity depend on the selected configuration.

Product information parameters and size markings

How Does a Hydraulic Stone Pressing Machine Work?

A typical production process is:

Prepare Stone → Select Tooling → Load → Position → Align → Apply Hydraulic Force → Release → Remove → Inspect

1. Prepare the Stone Blank

The stone is first cut or prepared to suitable dimensions for the required finished product.

2. Select the Tooling

The correct mould, die or pressing tool is selected according to the required shape or pattern.

3. Load the Workpiece

The prepared blank is placed on the working table.

4. Align the Stone and Tooling

The workpiece should be correctly positioned before hydraulic pressure is applied.

5. Apply Hydraulic Force

The hydraulic cylinder moves the pressing head toward the stone and tooling.

6. Complete the Pressing Cycle

The tooling transfers force into the stone and creates the required mould-defined form or decorative effect.

7. Remove and Inspect

After the pressing head returns to the approved unloading position, the finished product can be removed and checked.

The final result can be affected by:

  • Stone type
  • Stone hardness
  • Blank length and width
  • Stone thickness
  • Tooling geometry
  • Mould contact area
  • Stone orientation
  • Hydraulic force
  • Material condition

Natural stone can vary internally, so trial processing may be useful when changing to a new stone type or developing a new product.

Product Video

Why Use a Hydraulic Stone Pressing Machine?

Manual shaping can be suitable for small-volume decorative stone work, but repeated factory production usually requires a more controlled process.

A hydraulic stone pressing machine can provide:

  • Controlled vertical pressing force
  • Repeatable machine cycles
  • Compatibility with suitable moulds
  • Reduced dependence on manual shaping
  • Decorative paver production
  • Patterned stone production
  • More organized factory processing
  • Potential secondary use of suitable stone offcuts

The main advantage is not simply higher pressure.

The value comes from combining controlled hydraulic force with suitable tooling and correctly prepared stone blanks.

Stone Pressing Machine for Granite

Granite is widely used for paving, landscaping and architectural applications.

Suitable granite blanks may be processed into products such as:

  • Decorative granite pavers
  • Garden paving
  • Landscape paving
  • Patterned granite pieces
  • Architectural decorative stone

Granite can vary considerably in grain size, mineral composition and internal structure.

A practical selection process is:

Granite Type → Blank Dimensions → Finished Product → Mould → Required Force → Machine

If your required product needs a natural fractured surface rather than a mould-defined shape, Speedone’s stone splitting machine for granite and marble uses a different processing method.

Stone Pressing Machine for Marble

Suitable marble can also be processed with hydraulic pressing equipment.

Marble often contains veins and directional structures that may influence how pressure moves through the stone.

Before selecting a machine, consider:

  • Marble type
  • Vein direction
  • Blank dimensions
  • Stone thickness
  • Required finished shape
  • Mould contact area

If your production requires both natural splitting and decorative pressing, Speedone’s marble splitting machine for split face and stamping explains both applications.

Stone Pressing Machine for Decorative Pavers

Decorative paving is one of the main applications for hydraulic stone pressing equipment.

Pressed stone products may be used for:

  • Garden paths
  • Courtyards
  • Pedestrian areas
  • Commercial plazas
  • Landscape projects
  • Villa gardens
  • Decorative outdoor paving

A typical production workflow may be:

Stone Slab or Offcut → Inspection → Pre-Sizing → Prepared Blank → Hydraulic Pressing → Inspection → Sorting → Packing

The pre-sizing stage prepares the basic blank dimensions.

The pressing stage creates the final mould-defined or tooling-defined result.

Stone Pressing Machine for Patterned Stone

Different moulds may be used to create different decorative results when supported by the machine configuration.

Possible products include:

  • Patterned paving pieces
  • Decorative landscape stone
  • Rustic stone products
  • Architectural decorative pieces

The tooling should always be evaluated together with the stone.

A mould that performs well with one granite or marble type may behave differently with another material.

Why the Stone Pressing Mould Matters

The mould or die determines how hydraulic force contacts the stone.

It can directly influence:

  • Finished geometry
  • Surface pattern
  • Pressure distribution
  • Edge condition
  • Product repeatability

For this reason, buyers should provide photos, samples or drawings of the desired finished product when requesting a quotation.

Can Different Stone Pressing Moulds Be Used?

Factories producing several decorative products may need different moulds or tooling configurations.

Before ordering, confirm:

  • Which mould types are supported
  • Maximum tooling dimensions
  • How the mould is positioned
  • How tooling is changed
  • Whether custom products require custom tooling

Tool changes should follow the approved procedure for the specific machine.

Stone Pressing Machine vs. Stone Stamping Machine

The two terms can describe very similar equipment.

A stone pressing machine places more emphasis on the hydraulic press, machine structure and pressing process.

A stone stamping machine places more emphasis on decorative patterns and mould-defined products.

Factor Stone Pressing Machine Stone Stamping Machine
Main Process Hydraulic pressing Decorative stamping
Moulds Important Primary part of the process
Decorative Pavers Strong application Strong application
Machine Structure Strong focus Model dependent

For buyers specifically comparing decorative stamping equipment, Speedone’s stone stamping machine for granite and marble provides a broader product overview.

Stone Pressing Machine vs. Stone Splitting Machine

Pressing and splitting may both use hydraulic power, but the finished result is different.

Functie Stone Pressing Machine Steen splitsmachine
Main Process Mould or tooling pressing Natural fracture
Finished Result Defined shape or pattern Natural split surface
Main Tooling Mould / press tooling Splitting tools
Decorative Pavers Strong application Natural split paving
Natural Wall Stone Application dependent Strong application

Factories mainly producing natural-face wall and building stone can review Speedone’s stone splitter for granite and building stone.

Stone Pressing Machine vs. Hydraulic Stone Splitting Machine

Both types of equipment may include hydraulic cylinders, pumps, pressure controls and rigid machine frames.

The main difference is how the hydraulic force is used.

A stone pressing machine transfers force through a mould or forming tool.

A stone splitting machine transfers force through splitting tools to create a fracture.

For more information about hydraulic splitting systems, see Speedone’s hydraulische steensplijtmachine.

Stone Pressing Machine vs. Diamond Saw

Stone pressing and diamond cutting are usually complementary processes rather than direct replacements.

A diamond saw prepares the stone dimensions.

The pressing machine then performs the forming or decorative stage.

A typical workflow may be:

Stone Slab → Saw Cutting → Prepared Blank → Hydraulic Pressing → Finished Decorative Product

This allows the factory to combine dimensional preparation with decorative processing.

Stone Pressing Machine for Suitable Stone Offcuts

Stone factories often produce offcuts during:

  • Slab cutting
  • Countertop fabrication
  • Architectural stone processing
  • Dimension-stone production

Selected structurally sound pieces may be suitable for secondary processing.

Possible products may include:

  • Small decorative pavers
  • Garden paving
  • Landscape pieces
  • Patterned stone products

A possible process is:

Stone Offcut → Inspection → Pre-Sizing → Prepared Blank → Hydraulic Pressing → Finished Product

Not every offcut is suitable.

Pieces with serious cracks, unsuitable dimensions or unstable geometry should be rejected.

Stone Pressing and Countertop Offcuts

Granite and marble countertop factories can generate offcuts during sink cutouts, slab optimization and countertop shaping.

Suitable pieces may potentially be redirected into secondary decorative products after inspection.

The finished countertop itself follows a different workflow involving precision cutting, edge fabrication, polishing and installation.

During installation, Speedone’s Stone Pro seam setter for granite and quartz countertops is designed for countertop positioning and seam alignment rather than hydraulic stone pressing.

How Much Hydraulic Force Is Required?

There is no single force rating suitable for every stone pressing application.

The requirement depends on:

  • Stone material
  • Stone hardness
  • Blank dimensions
  • Stone thickness
  • Mould dimensions
  • Tool contact area
  • Required finished product

A useful selection process is:

Stone → Blank Dimensions → Finished Product → Mould → Required Force → Machine

Choosing the highest available tonnage does not automatically produce a better product.

Why the Four-Column Structure Matters

The Speedone machine shown for this application uses multiple vertical guide columns around the pressing area.

This guided structure helps maintain the relationship between:

  • Hydraulic cylinder
  • Upper pressing assembly
  • Mould or tooling
  • Stone workpiece
  • Lower working table

Correct alignment remains important throughout the complete pressing cycle.

Stone Pressing Machine Working Area

The machine working area must accommodate both the stone blank and the required tooling.

Buyers should provide:

  • Typical blank length
  • Typical blank width
  • Maximum blank length
  • Maximum blank width
  • Typical stone thickness
  • Maximum stone thickness
  • Finished-product dimensions
  • Required mould dimensions

This information is more useful for machine selection than simply requesting the highest-pressure press.

Why Workpiece Support Matters

The stone must remain correctly supported while hydraulic force is applied.

Poor support may contribute to:

  • Unwanted cracking
  • Uneven pressing
  • Edge breakage
  • Poor pattern transfer
  • Uneven tooling wear

The worktable, fixture, mould and stone blank should therefore be treated as one complete pressing system.

Stone Pressing Machine Hydraulic System

A typical hydraulic press system may contain:

  • Electric motor
  • Hydraulic pump
  • Oil reservoir
  • Hydraulic cylinder
  • Control valves
  • Hydraulic hoses
  • Pressure-control components

The exact hydraulic configuration depends on the selected machine.

Operating settings should remain within the approved range for the machine supplied.

Standalone Stone Pressing Machine vs. Production Line

Factor Standalone Machine Integrated Line
Initial Investment Lager Higher
Product Flexibility Higher More specialized
Material Feeding More manual More integrated
Tool Changes More flexible Depends on line design
Output Potential Application dependent Higher for standardized production

A standalone machine may be more practical for factories producing several different decorative products.

An integrated line can become more useful when the same product is produced repeatedly in larger quantities.

Planning a Stone Pressing Production Workflow

A typical factory workflow may be:

Stone Storage → Sawing → Blank Preparation → Inspection → Hydraulic Pressing → Sorting → Packing

Every stage can affect total production.

A fast hydraulic press will not automatically create high output if:

  • Blank preparation is slow
  • Material loading takes too long
  • Mould changes are inefficient
  • Finished products cannot be removed quickly
  • Inspection creates delays
  • Packing becomes a bottleneck

The complete production flow should therefore be considered when evaluating machine capacity.

How to Choose the Right Stone Pressing Machine

1. Define the Stone Material

Specify the granite, marble or other suitable stone that will be processed.

2. Define Typical Blank Dimensions

Provide the normal length, width and thickness used in daily production.

3. Define Maximum Blank Dimensions

The machine and tooling must accommodate the largest routine workpieces.

4. Define the Finished Product

Provide photos, drawings or samples whenever possible.

5. Define the Required Pattern or Shape

The finished design determines the mould and tooling requirement.

6. Evaluate Hydraulic Force

The required force should be selected according to the stone, blank size and tooling rather than maximum tonnage alone.

7. Evaluate the Working Area

Make sure there is enough space for both the mould and stone blank.

8. Consider Tool Changes

This is particularly important when the factory produces several product designs.

9. Define Production Requirements

Estimate realistic production requirements per shift rather than looking only at the pressing stroke.

10. Plan Material Handling

Consider how raw blanks are loaded and how finished products are removed.

11. Ask About Spare and Wear Parts

Discuss hydraulic components and tooling-related wear items before purchasing.

12. Evaluate Manufacturer Support

Technical communication, documentation, tooling support and spare-parts availability are important for industrial stone machinery.

Information to Send Speedone for a Quotation

To help Speedone evaluate a suitable stone pressing machine, provide:

  1. Stone material
  2. Raw-material photographs
  3. Typical blank length and width
  4. Maximum blank dimensions
  5. Typical stone thickness
  6. Maximum stone thickness
  7. Approximate workpiece weight
  8. Required finished-product dimensions
  9. Finished-product photos or drawings
  10. Required pattern or shape
  11. Number of product designs
  12. Required production volume
  13. Factory voltage and frequency
  14. Available installation area
  15. Preferred loading method

A finished-product sample, drawing or photograph is especially useful when evaluating the mould and tooling requirement.

Need Help Choosing a Stone Pressing Machine?
Send Speedone your stone type, blank dimensions, desired finished-product photos or drawings, required pattern and production target. These details can help evaluate the hydraulic press, working area and tooling configuration for your application.

Common Stone Pressing Problems

Stone Cracks During Pressing

Check the material condition, blank dimensions, mould alignment and approved hydraulic settings.

The Pattern Is Incomplete

Check mould contact, workpiece positioning and whether the stone is suitable for the selected tooling.

One Side Presses More Than the Other

Inspect workpiece support and alignment between the pressing head, mould and working table.

Edges Break Excessively

Review blank preparation, material condition, mould geometry and positioning.

Tooling Wears Unevenly

Check whether the mould and pressing assembly remain correctly aligned.

Production Is Lower Than Expected

Measure blank preparation, loading, pressing, unloading, inspection and mould-change time separately.

Stone Pressing Machine Maintenance

Routine inspection should include:

  • Hydraulic oil
  • Hydraulic cylinder
  • Hydraulic pump
  • Electric motor
  • Hoses
  • Fittings
  • Control valves
  • Pressure controls
  • Guide columns
  • Pressing head
  • Moulds and tooling
  • Working table
  • Machine frame
  • Electrical controls
  • Safety systems

Hydraulic leaks should be investigated promptly.

Damaged hydraulic hoses or tooling should not remain in operation.

Maintenance intervals should follow the technical documentation supplied with the specific Speedone machine.

Stone Pressing Machine Safety

A hydraulic stone press generates substantial mechanical force and should only be operated by trained personnel.

  • Inspect the machine before operation.
  • Inspect every stone blank before loading.
  • Keep hands away from the pressing area.
  • Make sure the mould and stone are correctly supported.
  • Do not bypass guards or safety controls.
  • Inspect hydraulic hoses regularly.
  • Use appropriate material-handling equipment.
  • Wear suitable personal protective equipment.
  • Keep unauthorized personnel away.
  • Use proper lockout procedures during maintenance.
  • Do not exceed approved workpiece dimensions.
  • Do not exceed manufacturer-rated hydraulic settings.
  • Replace damaged tooling before continued operation.

Who Uses Stone Pressing Machines?

Professional stone pressing equipment may be suitable for:

  • Granite processing factories
  • Marble processing factories
  • Decorative stone manufacturers
  • Paving stone producers
  • Landscape stone factories
  • Architectural stone companies
  • Stone offcut processing operations
  • Stone machinery distributors

Waarom kiezen voor Speedone?

Speedone supplies professional equipment for stone processing, handling and installation.

When selecting a stone pressing machine, buyers should compare the complete production requirement instead of focusing only on maximum hydraulic tonnage.

A practical selection process is:

Stone → Blank Dimensions → Finished Product → Mould → Hydraulic Requirement → Working Area → Production Workflow

Also consider:

  • Machine structure
  • Hydraulic system
  • Guide-column alignment
  • Pressing-head configuration
  • Mould compatibility
  • Working-table access
  • Product-change requirements
  • Spare-parts availability
  • Technical documentation
  • Supplier communication

Final Note:
A successful stone pressing process begins with the finished product rather than the highest hydraulic-force rating. Define the stone material, blank dimensions, required pattern or shape, mould and expected production volume first. The machine can then be matched to the actual application.

Veelgestelde vragen

What is a stone pressing machine?

A stone pressing machine uses controlled mechanical or hydraulic force with suitable moulds or tooling to process prepared stone blanks into decorative or paving products.

Is a stone pressing machine hydraulic?

Many industrial stone pressing machines use hydraulic power because it provides strong and controlled vertical pressing force.

Can a stone pressing machine process granite?

Suitable configurations can process prepared granite blanks when their dimensions, material characteristics and tooling requirements fall within the approved working range.

Can it process marble?

Suitable marble can be processed, although veins and internal structure may influence how the material responds to pressing.

Can a stone pressing machine make pavers?

Yes. Decorative paving products are an important application for suitable hydraulic stone presses and mould configurations.

Can different moulds be used?

Supported mould options depend on the machine configuration. Buyers should provide the required finished-product design so the tooling requirement can be evaluated.

What is the difference between a stone pressing machine and a stone stamping machine?

The equipment categories overlap. A stone pressing machine emphasizes the hydraulic pressing process and machine structure, while a stone stamping machine places more emphasis on decorative patterns and mould-defined products.

What is the difference between pressing and splitting stone?

Pressing uses moulds or tooling to create a defined product, while splitting fractures the stone to produce a natural split surface.

Can stone offcuts be processed?

Selected structurally sound offcuts may be suitable after inspection and pre-sizing when they meet the machine and tooling requirements.

How much hydraulic force is required?

The required force depends on stone material, blank dimensions, stone thickness, mould area and the desired finished product.

Why is the mould important?

The mould determines how hydraulic force contacts the stone and directly influences the finished shape, pattern and pressure distribution.

What information should I provide for a quotation?

Provide the stone material, blank dimensions, thickness, approximate workpiece weight, finished-product photos or drawings, required pattern, production target, factory power supply and available installation space.

Wat is er nog meer?



    Laat uw bericht achter



      UW KAART