İşinizi Verimli Bir Şekilde Yapın!

Guillotine Stone Splitter Manufacturer | Speedone

  • Ağırlık : 1,6T
  • Pressure : 80T
  • Power : 11KW

Ürün Açıklaması

Hydraulic Guillotine Stone Splitter for Granite, Pavers & Wall Stone

Hızlı Özet:
Speedone guillotine stone splitter is designed for professional stone factories processing granite, marble and other suitable natural stones. Hydraulic force is applied through a vertically operating splitting head to produce pavers, cobblestones, stone cubes, wall stone, building stone and natural split-face products. The right machine should be selected according to stone type, workpiece dimensions, finished product, splitting force, tool configuration, worktable design, loading method and required production output.

What Is a Guillotine Stone Splitter?

guillotine-stone-splitter-speedone guillotine-stone-splitter-for-granite
Product display and finished product display

A guillotine stone splitter is industrial equipment used to fracture natural stone by applying concentrated mechanical force through a vertically operating splitting head.

The term “guillotine” describes the machine’s vertical splitting action.

Unlike a diamond saw, the machine does not normally cut completely through the material with a rotating blade.

Instead, hydraulic force is transferred through the splitting tools until the internal stress becomes greater than the stone can resist.

The stone then fractures along its natural structure.

The resulting surface is typically rougher and more natural than a saw-cut surface.

This makes the machine suitable for producing:

  • Granite pavers
  • Cobblestones
  • Stone cubes
  • Wall stone
  • Building stone
  • Landscape stone
  • Natural-face veneer
  • Masonry products
  • Garden stone
  • Rustic architectural stone
  • Selected products from suitable stone offcuts

The purpose is not simply to break stone.

The goal is to convert prepared natural stone into commercially useful products with a natural fractured appearance.

Why Use a Hydraulic Guillotine Stone Splitter?

Stone can also be split manually with hammers, wedges and chisels.

Manual methods can still be useful for low-volume masonry and final hand shaping.

For factory production, however, a hydraulic machine provides a more repeatable way to apply force.

Potential benefits include:

  • Controlled hydraulic splitting
  • Reduced repeated manual hammering
  • Natural fractured surfaces
  • Faster repetitive processing
  • Processing of different stone sizes
  • Paver and cobblestone production
  • Wall and building stone production
  • Potential production-line integration
  • Compatibility with suitable feeding systems
  • Secondary processing of selected stone offcuts

However, hydraulic tonnage is only one part of machine selection.

The machine should also match:

  • Stone material
  • Workpiece width
  • Workpiece thickness
  • Finished-product size
  • Splitting-head design
  • Tool configuration
  • Working-table size
  • Loading method
  • Product-removal method
  • Required output

Speedone Guillotine Stone Splitter Configuration

hydraulic-guillotine-stone-splitter guillotine-stone-splitter-manufacturer
Dimension annotations and parameter information table

The Speedone machine shown for this application uses a stationary hydraulic stone-splitting structure with an open working area.

Visible functional parts include:

  • Rigid vertical machine frame
  • Wide front working table
  • Upper hydraulic cylinder section
  • Enclosed splitting-head assembly
  • Hydraulic hoses
  • Operator control panel
  • Side hydraulic power unit
  • Electric motor
  • Reinforced lower machine base

The open-front worktable provides useful access for loading, positioning and removing individual stone pieces.

This can be particularly important when a workpiece must be rotated or repositioned between several splitting cycles.

Exact splitting force, working width, working height and production capacity depend on the selected machine configuration.

How Does a Guillotine Stone Splitter Work?

A typical working process is:

Inspect → Load → Position → Align → Apply Hydraulic Force → Split → Release → Remove → Inspect

1. Inspect the Stone

Check the material for major cracks, loose sections or structural defects.

2. Load the Workpiece

Place the stone securely on the working table.

3. Position the Split

Align the intended fracture area beneath the splitting tools.

4. Apply Hydraulic Force

The hydraulic system moves the splitting head toward the stone.

5. Complete the Fracture

As pressure increases, the force becomes concentrated until the stone separates.

6. Release and Remove

Once the machine returns to the safe unloading position, the finished pieces can be removed and inspected.

The final result can be influenced by:

  • Stone material
  • Stone hardness
  • Workpiece width
  • Workpiece thickness
  • Natural grain
  • Veins
  • Bedding direction
  • Existing fractures
  • Splitting-tool geometry
  • Stone positioning

Because natural stone is not perfectly uniform, two workpieces with the same dimensions may still fracture differently.

Guillotine Stone Splitter for Granite

Granite is one of the most common materials processed with hidrolik taş ayırıcıs.

It is widely used for:

  • Paving stone
  • Cobblestones
  • Stone cubes
  • Retaining-wall stone
  • Landscape blocks
  • Architectural wall stone
  • Garden stone
  • Natural-face cladding

Granite structure can vary significantly.

Fine-grained and coarse-grained granite may behave differently during splitting.

Natural fractures, mineral distribution and workpiece orientation can also affect the result.

A practical selection sequence is:

Granite Type → Input Dimensions → Finished Product → Required Force → Machine Configuration

If your factory also processes marble or other natural stone, Speedone’s stone splitting machine for granite and marble provides a broader overview of stone splitting applications.

Guillotine Stone Splitter for Paving Stone

Paving stone is one of the strongest applications for guillotine splitting equipment.

Granite and other suitable natural stones are often first prepared as strips or rectangular blanks.

A typical production process is:

Stone Block → Sawing → Stone Strip → Guillotine Splitting → Sorting → Packing

Possible products include:

  • Granite pavers
  • Driveway pavers
  • Plaza paving
  • Garden paving
  • Cobblestones
  • Stone cubes
  • Landscape paving

The saw creates the initial dimensions.

The guillotine splitter then creates the final natural fractured surface.

This combination allows the factory to combine dimensional control with a more natural stone appearance.

Guillotine Stone Splitter for Cobblestones

Cobblestone production normally requires many repeated splitting cycles.

A prepared stone bar may be split once, repositioned and split again.

Important production factors include:

  • Input-bar width
  • Input thickness
  • Finished cobblestone size
  • Number of splits per piece
  • Loading speed
  • Repositioning speed
  • Product removal
  • Sorting efficiency

For this application, a larger hydraulic force does not automatically create higher output.

If loading and repositioning take too long, they can become the real production bottleneck.

Guillotine Stone Splitter for Stone Cubes

Stone cubes are widely used in:

  • Historic streets
  • Pedestrian areas
  • Driveways
  • Commercial plazas
  • Landscape projects
  • Garden paths

Cube production often requires multiple splitting operations.

A typical sequence may be:

Stone Strip → First Split → Reposition → Second Split → Stone Cube

For this type of production, easy access to the worktable can make positioning and repeated handling more practical.

Guillotine Stone Splitter for Building Stone

Building stone includes many different natural products.

Typical examples include:

  • Retaining-wall stone
  • Masonry stone
  • Garden wall stone
  • Landscape blocks
  • Architectural stone
  • Rustic facade stone
  • Natural cladding

Hydraulic splitting exposes the natural interior of the stone and creates a textured surface that looks very different from a flat saw cut.

For buyers focused on building-stone and granite applications, Speedone’s stone splitter for granite and building stone provides additional application information.

Guillotine Stone Splitter for Wall Stone

Wall stone production often benefits from a natural fractured surface.

Applications can include:

  • Exterior walls
  • Landscape walls
  • Retaining walls
  • Garden walls
  • Feature walls
  • Rustic facades
  • Architectural cladding

The fractured face can expose natural mineral colors and textures that may be less visible on the original stone surface.

For many architectural applications, this exposed surface is the desired finished appearance.

Guillotine Stone Splitter for Natural Split Face

Natural split-face production is one of the main reasons stone factories use hydraulic splitting machinery.

A diamond saw creates a relatively flat surface.

A guillotine splitter creates a fractured surface.

This can show:

  • Irregular relief
  • Crystalline texture
  • Natural depth
  • Rustic appearance
  • Variation between individual pieces

This variation is often part of the design value of the finished product.

Guillotine Stone Splitter for Stone Veneer

A guillotine stone splitter can also be used to expose natural faces for veneer products.

A possible production process is:

Raw Stone → Pre-Sizing → Hydraulic Splitting → Face Inspection → Secondary Sizing → Sorting → Packing

The splitter creates the natural fractured face.

If the final veneer requires tightly controlled thickness, additional processing may still be necessary.

Important considerations include:

  • Required face dimensions
  • Stone thickness
  • Surface appearance
  • Material grain
  • Finished-product weight
  • Packaging requirements

Guillotine Stone Splitter for Marble

Marble can also be processed with suitable hydraulic splitting equipment.

However, marble often contains visible veins that can influence the fracture direction.

Correct stone orientation is therefore particularly important.

Possible marble products include:

  • Split-face wall stone
  • Decorative cladding
  • Marble veneer
  • Rustic architectural stone
  • Landscape pieces

Some marble applications may also require decorative mould pressing instead of only natural splitting.

For those applications, Speedone’s marble splitting machine for split face and stamping provides more information.

Guillotine Stone Splitter vs. Stone Stamping Machine

A stone guillotine and a stone stamping machine can both use hydraulic pressure, but they create different products.

Özellik Guillotine Stone Splitter Stone Stamping Machine
Main Process Natural fracture Mould pressing
Main Tooling Splitting tools Mould / die
Finished Surface Natural fractured Tool-defined
Natural Split Face Primary application Secondary
Decorative Patterns Limited Strong application
Paving Products Natural split products Formed products

If your finished product needs repeatable decorative shapes, Speedone’s stone stamping machine for granite and marble may be more suitable.

Guillotine Stone Splitter vs. Hydraulic Stone Splitting Machine

These two terms can describe very similar equipment.

For the buyer, the important point is not the name but whether the machine configuration matches the actual stone and finished product.

Factor Guillotine Stone Splitter Hydraulic Stone Splitting Machine
Main Action Vertical stone splitting Hydraulic stone splitting
Paving Stone Strong application Strong application
Wall Stone Strong application Strong application
Conveyor Integration Possible Possible
Natural Split Face Primary application Common application

Speedone's hidrolik taş ayırma makinesi page provides broader information about hydraulic systems, machine structure and production-line configurations.

Guillotine Stone Splitter vs. Diamond Saw

A guillotine stone splitter and a diamond saw perform different jobs.

Özellik Guillotine Stone Splitter Diamond Saw
Process Fracturing Cutting
Finished Surface Natural split Smooth sawn
Dimensional Accuracy Orta düzeyde Yüksek
Natural Texture Strong Limited
Paving Production Natural finish Blank preparation
Wall Stone Natural-face production Sizing and preparation

Many factories use both machines.

A common workflow is:

Saw for Dimensions → Guillotine Splitter for Natural Finish

Guillotine Stone Splitter vs. Manual Splitting

Factor Hydraulic Guillotine Manual Splitting
Force Source Hydraulic Human force
Repeated Production Better suited More labor intensive
Larger Workpieces Better suited on suitable models More difficult
Factory Workflow Easier to organize More dependent on labor
Natural Surface Evet Evet

Main Components of a Guillotine Stone Splitter

Machine Frame

The frame supports the mechanical force generated during splitting and helps maintain alignment between the hydraulic system, splitting tools and stone.

Hydraulic Cylinder

The hydraulic cylinder converts oil pressure into linear movement and drives the splitting head toward the workpiece.

Hydraulic Power Unit

The hydraulic power unit provides and controls the pressure required for the splitting cycle.

Splitting Head

The splitting head transfers hydraulic force into the stone.

Splitting Tools

Depending on machine configuration, the tooling may include:

  • Splitting blades
  • Chisels
  • Individual splitting teeth
  • Segmented tools
  • Upper and lower splitting assemblies

Çalışma Masası

The worktable supports the material during loading, positioning and splitting.

Control System

The control panel allows the operator to manage the splitting cycle according to the approved operating procedure.

Why Splitting Tool Design Matters

A large hydraulic system is only useful if the force can be transferred effectively into the stone.

The splitting tools influence:

  • Initial contact
  • Force concentration
  • Fracture initiation
  • Kenar yontma
  • Finished surface quality
  • Workpiece stability

Natural stone surfaces are not always perfectly flat.

Tool contact can therefore be especially important when processing rough or irregular material.

Buyers should compare the complete splitting-head configuration rather than only comparing machine tonnage.

Multiple Splitting Teeth for Uneven Stone

Some guillotine-style splitting systems may use multiple splitting teeth or segmented contact tools.

This can be useful when the stone surface is uneven.

Potential advantages may include:

  • Better contact with rough surfaces
  • Improved force distribution
  • Better adaptation to uneven stone
  • More controlled fracture initiation

The exact tool configuration should be confirmed for the specific Speedone machine being ordered.

How Much Splitting Force Do You Need?

There is no single correct force rating for every stone.

Required hydraulic capacity depends on:

  • Stone type
  • Stone strength
  • Workpiece width
  • Workpiece thickness
  • Natural grain
  • Tool geometry
  • Finished-product requirements

A practical selection sequence is:

Material → Dimensions → Finished Product → Required Force → Machine

Do not select a machine simply because it has the highest available tonnage.

An unnecessarily oversized machine can increase:

  • Purchase cost
  • Floor-space requirements
  • Energy demand
  • Material-handling requirements

Guillotine Stone Splitter Working Width

Working width determines the widest stone that can fit in the splitting area.

When requesting a quotation, provide:

Typical Width + Maximum Width

Typical daily production dimensions are particularly important because they represent the material the machine will handle most often.

Guillotine Stone Splitter Working Height

Working height determines the maximum thickness or height that can fit beneath the splitting head.

Provide:

Typical Thickness + Maximum Thickness

Stone thickness can also influence the splitting force required, so working dimensions and hydraulic capacity should be considered together.

Why Worktable Design Matters

The worktable supports the stone and gives the operator space to position the required fracture line.

Important factors include:

  • Table size
  • Stone access
  • Workpiece support
  • Repositioning space
  • Loading direction
  • Finished-product removal

The Speedone configuration shown for this application has a broad open-front table that provides access for positioning individual pieces.

Hydraulic System

The hydraulic system provides the machine’s working force.

A typical system may include:

  • Electric motor
  • Hydraulic pump
  • Oil tank
  • Hydraulic cylinder
  • Valves
  • Hoses
  • Pressure-control components

The Speedone configuration shown for this application includes a side-mounted motor and hydraulic power section.

Exact specifications remain model-dependent.

Hydraulic settings should always remain within the approved range for the machine supplied.

Standalone Guillotine Stone Splitter vs. Production Line

Factor Standalone Guillotine Production Line
Investment Daha düşük Higher
Floor Space Daha düşük Higher
Esneklik Higher More specialized
Feeding More manual More integrated
Product Variation Better for mixed production Better for standardized products
Output Potential Moderate to high Higher
Conveyors Opsiyonel Common

A standalone splitter can provide more flexibility for factories producing different wall, landscape and paving products.

A production line may be more efficient when the factory continuously produces standardized pavers or cobblestones.

Guillotine Stone Splitter with Conveyor

For repeated production, conveyors can help move stone into and away from the machine.

A possible arrangement is:

Infeed → Position → Guillotine Split → Outfeed → Sorting

Potential benefits include:

  • Reduced repeated lifting
  • More organized material flow
  • Faster stone movement
  • Easier integration with other machines
  • Improved repetitive production

The conveyor should be selected according to actual workpiece dimensions and weight.

How to Plan a Stone Splitting Production Line

A complete production line should be planned as one workflow.

A typical sequence may be:

Stone Storage → Sawing → Blank Staging → Feeding → Guillotine Splitting → Sorting → Palletizing

Every stage can limit total production.

A fast splitter will not solve a slow workflow if:

  • Sawing cannot provide enough blanks
  • Stone positioning is too slow
  • Finished products cannot be removed quickly
  • Sorting is poorly organized
  • Palletizing cannot keep up

The complete material flow should therefore be evaluated together.

Why Material Handling Matters

The hydraulic splitting stroke is only one part of the complete production cycle.

The actual workflow is:

Pick Up → Load → Position → Split → Remove → Sort → Reload

If loading takes much longer than splitting, increasing hydraulic speed alone will provide limited improvement.

Depending on production requirements, a factory may also need:

  • Roller tables
  • Conveyors
  • Forklifts
  • Overhead lifting equipment
  • Stone manipulators
  • Staging areas
  • Sorting bins
  • Palletizing areas

Guillotine Stone Splitter for Stone Offcuts

Stone factories often generate offcuts during:

  • Slab cutting
  • Countertop fabrication
  • Building-stone production
  • Architectural stone processing
  • Step fabrication

Selected structurally sound offcuts may still have secondary value.

Possible products include:

  • Small pavers
  • Wall stone
  • Landscape products
  • Garden stone
  • Natural-face decorative pieces

A possible process is:

Offcut → Inspection → Pre-Sizing → Guillotine Splitting → Sorting

Stone with serious cracks or unsuitable geometry should not be processed simply because it fits inside the machine.

Stone Splitting in Countertop Factories

A guillotine stone splitter is not normally used to manufacture the finished countertop itself.

Countertops typically require:

  • Saw cutting
  • CNC machining
  • Edge fabrication
  • Polishing
  • Installation

However, countertop factories can generate suitable granite or natural-stone offcuts.

Those pieces may enter a secondary workflow:

Slab → Countertop Fabrication → Offcut Selection → Stone Splitting → Secondary Product

The finished countertop follows a different process.

During installation, Speedone’s Stone Pro seam setter for granite and quartz countertops is used for countertop positioning and seam work rather than stone splitting.

How to Choose the Right Guillotine Stone Splitter

1. Define the Stone Material

Identify whether you mainly process granite, marble, limestone, sandstone or another compatible natural stone.

2. Define Typical Workpiece Dimensions

Your normal daily production size should guide machine selection.

3. Define Maximum Dimensions

The working opening must still accommodate the largest routine pieces.

4. Define the Finished Product

Specify whether you produce:

  • Pavers
  • Cobblestones
  • Stone cubes
  • Wall stone
  • Building stone
  • Veneer
  • Landscape stone

5. Define Finished-Product Dimensions

The finished size affects how many splitting cycles are required and how the material needs to be handled.

6. Define Required Output

Estimate realistic production requirements per shift.

7. Evaluate Hydraulic Capacity

Select splitting force according to the actual stone and dimensions.

8. Evaluate Splitting-Head Design

Tool configuration should match the surface condition and desired fracture.

9. Evaluate Worktable Access

Consider how the stone will be loaded, rotated and removed.

10. Plan Material Handling

Decide whether manual loading, roller tables or conveyors are appropriate.

11. Consider Spare Parts

Ask about splitting tools and hydraulic wear components.

12. Evaluate Supplier Support

Technical documentation, spare-part availability and responsive communication are important for industrial equipment.

Information to Send Speedone for a Quotation

To help Speedone evaluate a suitable guillotine stone splitter, provide:

  1. Stone material
  2. Raw-material photos
  3. Typical workpiece width
  4. Maximum width
  5. Typical thickness
  6. Maximum thickness
  7. Approximate piece weight
  8. Required finished-product dimensions
  9. Finished-product photos
  10. Required production volume
  11. Current splitting method
  12. Preferred loading method
  13. Factory voltage and frequency
  14. Available installation area
  15. Whether conveyors are required

Photos of both the raw material and desired finished product are especially useful because they show details that dimensions alone cannot fully explain.

Need Help Choosing a Guillotine Stone Splitter?Send Speedone your stone type, raw-material photos, typical and maximum dimensions, finished-product size, target production output and preferred loading method. If you need a conveyor-assisted system or complete production line, also provide your available factory space and current material flow so the complete configuration can be evaluated together.

Common Guillotine Stone Splitting Problems

Stone Fractures in the Wrong Direction

Natural grain, bedding, veins or existing cracks may redirect the fracture.

Excessive Chipping

Inspect stone positioning, tool condition and workpiece quality.

The Stone Requires Too Much Pressure

Confirm that the workpiece is within the approved machine capacity.

Do not exceed the manufacturer’s rated hydraulic pressure.

The Splitting Tools Contact Unevenly

The stone surface may be irregular.

Review stone positioning and the approved tooling configuration.

Finished Products Vary Too Much

Check incoming blank dimensions and positioning consistency.

Some variation will remain because natural stone is not a perfectly uniform material.

Production Output Is Too Low

Measure the complete cycle.

Loading, repositioning, unloading and sorting may take more time than the hydraulic split itself.

Guillotine Stone Splitter Maintenance

Routine inspection should include:

  • Hydraulic oil
  • Electric motor
  • Hydraulic pump
  • Hydraulic cylinder
  • Hoses
  • Fittings
  • Valves
  • Pressure controls
  • Splitting head
  • Splitting tools
  • Tool guides
  • Working table
  • Machine frame
  • Electrical controls
  • Safety systems

Hydraulic leaks should be investigated promptly.

Damaged hoses should not remain in operation.

Splitting tools should be checked regularly for abnormal wear or damage.

Maintenance intervals should follow the documentation supplied with the specific machine.

Guillotine Stone Splitter Safety

A hydraulic stone guillotine generates substantial force and should only be operated by trained personnel.

  • Inspect the equipment before every production shift.
  • Inspect the stone before loading.
  • Keep hands away from the splitting zone.
  • Make sure the stone is stable.
  • Never bypass guards or safety controls.
  • Inspect hydraulic hoses and fittings regularly.
  • Use suitable equipment for heavy stone handling.
  • Wear appropriate personal protective equipment.
  • Keep unauthorized personnel away from the machine.
  • Follow lockout procedures during maintenance.
  • Do not exceed approved workpiece dimensions.
  • Do not exceed manufacturer-rated hydraulic settings.
  • Replace damaged splitting tools.

Natural stone may fracture unpredictably and release stone fragments, so the working area should always be treated as a high-force processing zone.

Who Uses Guillotine Stone Splitters?

A professional guillotine stone splitter may be suitable for:

  • Granite factories
  • Natural stone processors
  • Paving stone manufacturers
  • Cobblestone producers
  • Building stone factories
  • Wall stone manufacturers
  • Landscape stone suppliers
  • Architectural stone companies
  • Quarry processing facilities
  • Hardscape manufacturers
  • Stone equipment distributors

Neden Speedone'u Seçmelisiniz?

Speedone supplies professional stone-processing, stone-handling and installation equipment for factories, workshops and distributors.

When choosing a guillotine stone splitter, start with the stone and finished product rather than maximum hydraulic tonnage.

A practical purchasing process is:

Stone Type → Input Dimensions → Finished Product → Splitting Force → Tooling → Worktable → Feeding Method → Required Output

When comparing machines, also consider:

  • Machine structure
  • Hydraulic system
  • Working width
  • Working height
  • Splitting-head configuration
  • Worktable accessibility
  • Material-handling method
  • Production-line compatibility
  • Spare-part availability
  • Technical documentation
  • Supplier communication

The objective is to build a practical production process that turns natural stone into commercially useful paving, wall, building and natural-face products.

Sıkça Sorulan Sorular

What is a guillotine stone splitter?

A guillotine stone splitter is industrial equipment that applies concentrated force through a vertically operating splitting head to fracture natural stone into smaller or finished products.

Is a guillotine stone splitter hydraulic?

Many professional stone guillotine splitters use hydraulic systems because hydraulic power provides strong and controlled splitting force.

What stones can a guillotine splitter process?

Depending on machine configuration, suitable equipment may process granite, marble, limestone, sandstone and other compatible natural stones.

Can a guillotine stone splitter split granite?

Yes. Suitable hydraulic models can process granite when the material characteristics and workpiece dimensions are within the machine’s approved working range.

Can it make paving stones?

Yes. Pavers, cobblestones and stone cubes are common applications for suitable guillotine splitting machines.

Can a stone guillotine produce wall stone?

Yes. Hydraulic splitting is widely used to expose natural fractured surfaces for wall, building and landscape stone products.

What is the difference between a guillotine stone splitter and a stone saw?

A guillotine splitter fractures stone to create a natural surface, while a saw removes material with a cutting blade to create a smoother and more dimensionally controlled surface.

What is the difference between a guillotine stone splitter and a hydraulic stone splitting machine?

The equipment can be very similar. A guillotine stone splitter emphasizes the vertical splitting configuration, while hydraulic stone splitting machine is a broader equipment description.

How much splitting force is required?

The required force depends on stone type, material strength, workpiece width, thickness, tool configuration and finished-product requirements.

Can the machine process irregular stone?

Suitable machines can process irregular natural stone when the workpiece remains within the approved machine capacity and can be positioned safely.

Can a guillotine stone splitter use conveyors?

Suitable industrial configurations can be combined with roller or powered conveyors for repeated production.

What information should I provide for a quotation?

Provide stone material, raw-stone photos, typical and maximum dimensions, approximate weight, finished-product requirements, production target, factory power supply, preferred loading method and available installation space.

Daha ne var?



    Mesajınızı Bırakın



      SEPETİNİZ