Erledigen Sie Ihre Arbeit effizient!

Granite Splitting Machine Manufacturer | Hydraulic | Speedone

  • Gewicht : 1.65T
  • Pressure : 80T
  • Power : 11KW

Beschreibung des Produkts

Hydraulic Granite Splitting Machine for Pavers & Wall Stone

Kurze Zusammenfassung:
Der Speedone granite splitting machine is designed for professional stone factories producing granite pavers, cobblestones, stone cubes, wall stone, veneer and natural split-face products. Hydraulic force fractures granite instead of cutting completely through it, creating the natural textured surface required for many paving, landscaping and architectural products. The right machine should be selected according to granite type, workpiece dimensions, finished-product size, splitting force, splitting-head design, material feeding and required production output.

What Is a Granite Splitting Machine?

granite-splitting-machine-speedone granite-splitting-machine-for-pavers
Product display and finished product display

A granite splitting machine is industrial stone-processing equipment used to divide granite into smaller pieces or finished products by applying concentrated mechanical force.

Professional machines commonly use hydraulic power.

The granite is placed on a supporting worktable beneath the splitting head. Hydraulic pressure then moves the splitting tools toward the stone until the material fractures.

This process is different from diamond sawing.

A diamond saw removes material along a cutting line and normally creates a relatively smooth surface.

A granite splitting machine separates the stone along its natural structure and creates a rougher, more natural fractured face.

Typical products include:

  • Granite paving blocks
  • Cobblestones
  • Granite cubes
  • Wall stone
  • Building stone
  • Landscape stone
  • Natural-face veneer
  • Garden stone
  • Architectural cladding
  • Rustic masonry products
  • Selected products made from suitable granite offcuts

The goal is not simply to break granite.

The goal is to create a practical and repeatable production process for commercially useful granite products.

Why Use a Hydraulic Granite Splitting Machine?

Granite is a strong and dense natural stone widely used for paving, landscaping and architectural applications.

Manual hammers, wedges and chisels can still be useful for small-volume or final shaping work, but factory production normally requires a more consistent way to apply force.

A hydraulic granite splitting machine can provide:

  • Controlled hydraulic splitting force
  • Reduced repeated manual hammering
  • Faster repetitive processing
  • Natural split-face production
  • Production of granite pavers and cobblestones
  • Production of stone cubes
  • Wall and landscape stone processing
  • Potential production-line integration
  • Compatibility with conveyors and material-handling systems
  • Secondary processing of suitable granite offcuts

Hydraulic force alone does not determine whether a machine is suitable.

The complete machine should also match:

  • Granite characteristics
  • Workpiece width
  • Workpiece thickness
  • Finished-product dimensions
  • Splitting-head design
  • Working-table size
  • Loading method
  • Required production volume

Speedone Granite Splitting Machine Configuration

The Speedone machine shown for this application uses a stationary hydraulic configuration designed around an open stone-processing area.

Visible machine elements include:

  • Rigid vertical machine frame
  • Broad front worktable
  • Upper hydraulic cylinder section
  • Enclosed splitting-head assembly
  • Hydraulic hoses
  • Operator control panel
  • Side-mounted hydraulic power components
  • Reinforced base structure
  • Open access around the worktable

The open work area gives the operator room to load, position, rotate and remove individual granite pieces.

This can be particularly useful for products that require more than one splitting operation, such as granite cubes and cobblestones.

Exact splitting force, working width, working height and production capacity depend on the machine configuration and should be selected according to the granite and finished product.

hydraulic-granite-splitting-machine granite-splitting-machine-manufacturer
Product size specifications and parameter information

How Does a Granite Splitting Machine Work?

A typical working cycle is:

Inspect → Load → Position → Align → Apply Hydraulic Pressure → Split → Release → Remove → Inspect

1. Inspect the Granite

Check the stone for obvious cracks, loose material and structural defects.

2. Position the Workpiece

Place the granite securely on the supporting table.

3. Align the Split

Position the intended fracture area beneath the splitting tools.

4. Apply Hydraulic Force

The hydraulic system moves the splitting head toward the granite.

5. Complete the Fracture

As pressure increases, force is concentrated through the stone until the granite separates.

6. Remove and Inspect

Once the machine returns to the safe unloading position, remove the finished piece and inspect the fracture.

The final result can be influenced by:

  • Granite type
  • Grain size
  • Mineral composition
  • Natural microcracks
  • Workpiece width
  • Workpiece thickness
  • Splitting direction
  • Tool geometry
  • Stone orientation
  • Hydraulic pressure
  • Tool condition

Because granite is a natural material, identical machine settings do not always produce exactly the same fracture on every stone.

Granite Splitting Machine for Paving Stone

Paving production is one of the main commercial applications for granite splitting equipment.

Granite paving is widely used for:

  • Driveways
  • Public plazas
  • Pedestrian streets
  • Courtyards
  • Garden paths
  • Landscape projects
  • Commercial paving
  • Historic-style streets

The granite is commonly prepared by sawing before splitting.

A typical process is:

Granite Block → Sawing → Granite Strip → Hydraulic Splitting → Inspection → Sorting → Packing

The saw prepares the strip or blank to controlled dimensions.

The granite splitting machine then divides that material into individual paving pieces with a natural fractured surface.

If your factory also processes marble or other natural stone, Speedone’s stone splitting machine for granite and marble covers a wider range of stone-splitting applications.

Granite Splitting Machine for Cobblestones

Cobblestone production usually involves repeated splitting of relatively small granite pieces.

For this application, the challenge is not only producing enough force.

The machine also needs to support fast and practical repetitive handling.

Important factors include:

  • Input granite bar dimensions
  • Finished cobblestone dimensions
  • Number of splitting cycles
  • Loading speed
  • Repositioning speed
  • Finished-product removal
  • Sorting workflow

A typical sequence may be:

Granite Bar → Position → First Split → Reposition → Additional Split → Cobblestone

A fast hydraulic cycle alone will not create high factory output if every piece takes too long to position and remove.

Granite Splitting Machine for Stone Cubes

Granite cubes are commonly used for:

  • Historic streets
  • Plazas
  • Driveways
  • Pedestrian zones
  • Garden projects
  • Commercial landscaping
  • Architectural developments

Cube production often requires the granite to be repositioned between splitting cycles.

A simple process may be:

Granite Strip → First Split → Rotate → Second Split → Granite Cube

For this reason, a spacious and accessible worktable can be important for efficient production.

Granite Splitting Machine for Wall Stone

Granite wall stone is selected for its strength, durability and natural visual texture.

Hydraulic splitting exposes the internal crystalline structure of the granite and creates a surface that looks very different from a flat saw-cut finish.

Applications include:

  • Retaining walls
  • Landscape walls
  • Garden walls
  • Exterior cladding
  • Rustic masonry
  • Architectural facades
  • Decorative wall stone

For buyers focused more heavily on finished building-stone products, Speedone’s stone splitter for granite and building stone provides additional application information.

Granite Splitting Machine for Natural Split Face

Natural split-face processing is one of the main reasons factories use granite splitting machines.

Granite contains visible mineral grains and crystals.

When the stone fractures, these internal structures become exposed.

The resulting surface may show:

  • Natural crystalline texture
  • Irregular relief
  • Rustic appearance
  • Depth variation
  • Natural color variation
  • Different light reflection across the surface

These characteristics are desirable in many landscaping, masonry and architectural applications.

The goal is not to make every fractured surface look identical.

Natural variation is part of the finished product.

Granite Splitting Machine for Stone Veneer

Granite veneer can combine a natural front face with controlled installation dimensions.

A possible production process is:

Granite → Pre-Sizing → Hydraulic Splitting → Natural Face → Secondary Thickness Processing if Required → Sorting → Packing

The splitting machine creates the natural fractured face.

If the finished veneer requires tightly controlled thickness, additional sawing or secondary processing may still be required.

Before selecting a machine for veneer production, define:

  • Required face dimensions
  • Granite thickness
  • Desired surface appearance
  • Grain orientation
  • Finished-product weight
  • Packaging requirements

Granite Block Splitting Machine

Granite blocks can range from relatively small prepared pieces to much larger stone.

As workpiece size increases, the machine and material-handling requirements also increase.

For larger granite blocks, consider:

  • Maximum workpiece width
  • Maximum workpiece height
  • Workpiece weight
  • Required hydraulic force
  • Machine-frame structure
  • Working-table support
  • Loading equipment
  • Stone stability

Auxiliary equipment may include:

  • Forklifts
  • Overhead cranes
  • Roller tables
  • Stone manipulators
  • Heavy-duty conveyors

The splitter should therefore be evaluated as part of the complete loading, processing and unloading system.

Granite Splitting Machine vs. Granite Splitter

These two names are often used for similar equipment.

For a buyer, the practical difference is usually small.

The important question is whether the machine fits your granite and finished product.

Factor Granite Splitter Granite Splitting Machine
Main Purpose Split granite products Split granite products
Hydraulic System Common on industrial models Common
Pavers & Cobblestones Strong application Strong application
Wall Stone Strong application Strong application
Production-Line Integration Model dependent Possible on suitable configurations

Instead of focusing on terminology, compare working dimensions, splitting force, tooling, worktable design and material flow.

Granite Splitting Machine vs. General Hydraulic Stone Splitting Machine

A granite splitting machine is focused specifically on granite applications.

A general hydraulic stone splitting machine may also be configured for materials such as:

  • Marmor
  • Limestone
  • Sandstone
  • Other compatible natural stone

If your factory processes several stone types, Speedone’s hydraulische Steinspaltmaschine page provides more information about general hydraulic configurations and production-line planning.

Granite Splitting Machine vs. Marble Splitting Machine

Granite and marble are both natural stones, but their internal structures can be different.

Granite commonly has a granular crystalline structure.

Marble may contain more visible veins and directional characteristics.

Factor Granit Marmor
Typical Structure Crystalline / granular Often veined
Pavers Strong application Possible
Cobblestones Strong application Less common
Wall Stone Strong application Strong application
Decorative Stamping Secondary Can be more relevant

For marble applications that also require mould-based decorative processing, Speedone’s marble splitting machine for split face and stamping covers that process separately.

Granite Splitting Machine vs. Stone Stamping Machine

A granite splitting machine and stone stamping machine use different processing methods.

Splitting creates a natural fracture.

Stamping uses a mould or defined tool form to create a more controlled shape or pattern.

Merkmal Granite Splitting Machine Stone Stamping Machine
Process Natural fracture Mould pressing
Finished Surface Natural Tool-defined
Main Tooling Splitting tools Mould / die
Natural Split Face Primary application Secondary
Decorative Patterns Limited Strong application

If your finished product requires repeatable mould-defined shapes, Speedone’s stone stamping machine for granite and marble may be the more suitable solution.

Granite Splitting Machine vs. Diamond Saw

A granite splitting machine and diamond saw usually complement each other rather than replace each other.

Merkmal Granite Splitting Machine Diamond Saw
Processing Method Fracture Cutting
Finished Surface Natural split Smooth saw cut
Dimensional Precision Mäßig Hoch
Natural Texture Strong Limited
Saw Kerf No conventional saw kerf Ja
Paver Production Final natural splitting Blank preparation

A common process is:

Saw for Dimensions → Split for Natural Finish

Hydraulic System of a Granite Splitting Machine

The hydraulic system generates the force required for splitting.

A typical configuration may contain:

  • Electric motor
  • Hydraulic pump
  • Oil reservoir
  • Hydraulic cylinder
  • Valves
  • Hydraulic hoses
  • Pressure-control components

The Speedone configuration shown for this application includes hydraulic hoses and a side-mounted hydraulic power section connected to the main machine body.

The hydraulic system should always operate within the approved settings for the specific machine.

If a workpiece is difficult to split, increasing pressure beyond the machine’s approved range is not the correct solution.

Why Machine Frame Strength Matters

The machine frame carries the force created by the hydraulic system.

A rigid frame helps maintain alignment between:

  • Hydraulic cylinder
  • Splitting head
  • Splitting tools
  • Granite workpiece
  • Supporting table

Important structural areas include:

  • Frame construction
  • Cylinder mounting
  • Working opening
  • Tool guidance
  • Worktable support
  • Machine base

A powerful hydraulic system cannot compensate for poor machine alignment.

Granite Splitting Head Design

The splitting head transfers hydraulic force into the granite.

Depending on machine configuration, the tooling may include:

  • Splitting blades
  • Chisels
  • Individual splitting teeth
  • Segmented tools
  • Upper and lower splitting assemblies

The tool design can influence:

  • Contact with the granite
  • Pressure concentration
  • Fracture initiation
  • Kantenabsplitterung
  • Finished-surface quality

Granite surfaces are not always completely flat, so tool contact becomes particularly important when processing rough or uneven material.

Why Granite Grain Matters

Granite contains different minerals and crystal structures.

Splitting behavior can be affected by:

  • Grain size
  • Mineral distribution
  • Natural fractures
  • Quarry direction
  • Weathering
  • Internal stress

A granite variety that splits predictably in one orientation may behave differently after the workpiece is rotated.

For unfamiliar granite, representative material information or samples can help when evaluating the required machine configuration.

How Much Splitting Force Is Required?

There is no single hydraulic-force rating suitable for every granite application.

The required force depends on:

  • Granite variety
  • Stone strength
  • Workpiece width
  • Workpiece thickness
  • Grain structure
  • Splitting-tool geometry
  • Finished-product requirements

A practical selection sequence is:

Granite → Dimensions → Finished Product → Required Force → Machine

Do not simply select the largest machine available.

An unnecessarily oversized machine can increase:

  • Purchase cost
  • Floor-space requirement
  • Energy requirement
  • Material-handling complexity

Granite Splitting Machine Working Width

Working width determines the widest granite piece that can enter the splitting area.

When requesting a quotation, provide:

Typical Width + Maximum Width

The typical width is important because it represents normal daily production.

Selecting a machine around one rare oversized stone can result in unnecessary machine size and investment.

Granite Splitting Machine Working Height

Working height determines the maximum thickness or height that can fit beneath the splitting head.

Provide:

Typical Thickness + Maximum Thickness

Thickness can also affect the required splitting force, so these specifications should be evaluated together.

Why Working Table Design Matters

The worktable supports the granite and affects how easily the operator can position the material.

Important factors include:

  • Table dimensions
  • Workpiece support
  • Operator access
  • Loading direction
  • Repositioning space
  • Finished-product removal

The Speedone configuration shown for this application has a broad open-front worktable that provides access for loading and positioning individual pieces.

Granite Splitting Machine with Conveyor

For standardized paving and cobblestone production, conveyors can improve material flow.

A possible arrangement is:

Infeed Conveyor → Positioning → Granite Splitting Machine → Outfeed → Sorting

Potential advantages include:

  • Reduced repeated manual lifting
  • More organized production
  • More consistent material flow
  • Easier production-line integration
  • Faster repeated processing

The correct conveyor should be selected according to granite size, weight and production requirements.

Standalone Granite Splitting Machine vs. Production Line

Factor Standalone Machine Production Line
Investment Niedriger Higher
Floor Space Niedriger Higher
Flexibilität Higher More specialized
Feeding More manual More integrated
Product Variation Better for multiple products Better for standardized products
Output Potential Moderate to high Higher
Conveyor Integration Optional Common

A standalone machine can be suitable for factories producing several different granite products.

A more integrated line may be useful when the factory continuously produces standardized pavers or cobblestones.

How to Plan a Granite Splitting Production Line

A granite splitting line should be planned as a complete workflow.

A possible sequence is:

Granite Storage → Sawing → Strip Staging → Feeding → Hydraulic Splitting → Sorting → Palletizing

Every stage can become a bottleneck.

For example, a fast splitting machine provides limited benefit if:

  • Sawing cannot provide enough material
  • Workpieces cannot be positioned quickly
  • Finished pieces accumulate around the machine
  • Sorting cannot keep up
  • Palletizing is too slow

The machine should therefore be evaluated together with the complete material flow.

Why Material Handling Affects Production

The hydraulic split itself may represent only a small part of the complete working cycle.

The full process is:

Pick Up → Load → Position → Split → Remove → Sort → Reload

If positioning takes much longer than the splitting cycle, increasing hydraulic speed alone will not significantly increase factory output.

Factories may also need to consider:

  • Raw-material staging areas
  • Roller tables
  • Conveyors
  • Forklift access
  • Overhead lifting equipment
  • Sorting stations
  • Palletizing areas

Granite Splitting Machine for Offcuts

Granite fabrication can generate offcuts during:

  • Slab cutting
  • Countertop fabrication
  • Architectural stone production
  • Stair production
  • Dimension-stone processing

Suitable pieces may be converted into:

  • Small pavers
  • Wall stone
  • Landscape stone
  • Garden stone
  • Decorative split-face products

A possible workflow is:

Granite Offcut → Inspection → Pre-Sizing → Splitting → Sorting → Secondary Product

Not every offcut is suitable.

Pieces with severe cracks or unstable structure should be rejected before splitting.

Granite Splitting in Countertop Factories

Countertop production is not the primary use of a granite splitting machine.

Countertops normally require:

  • Precision sawing
  • CNC machining
  • Edge fabrication
  • Polishing
  • Installation

However, countertop production can generate usable granite offcuts.

A secondary workflow may be:

Granite Slab → Countertop Fabrication → Offcut Sorting → Granite Splitting → Secondary Stone Products

The finished countertop follows a different process.

During installation, Speedone’s Stone Pro seam setter for granite and quartz countertops is designed for countertop positioning and seam adjustment rather than granite splitting.

How to Choose the Right Granite Splitting Machine

1. Identify the Granite

Different granite varieties can behave differently during splitting.

2. Define Typical Input Size

Normal daily dimensions should guide machine selection.

3. Define Maximum Input Size

The working opening must still accommodate the largest regular workpieces.

4. Define the Finished Product

Specify whether you produce:

  • Pavers
  • Cobblestones
  • Stone cubes
  • Wall stone
  • Veneer
  • Landscape stone

5. Provide Finished-Product Dimensions

This is especially important for repetitive paving and cobblestone production.

6. Define Required Output

Estimate realistic production requirements per shift.

7. Evaluate Hydraulic Capacity

Required force should match the granite and workpiece dimensions.

8. Evaluate Splitting-Head Design

Tool contact can strongly affect the fracture and finished surface.

9. Evaluate Worktable Access

Consider how the granite will be loaded, rotated and repositioned.

10. Plan Material Feeding

Decide whether manual feeding, roller tables or conveyors are appropriate.

11. Check Spare Parts

Ask about splitting tools and hydraulic wear components.

12. Check Technical Support

Documentation, replacement parts and responsive communication are important when purchasing industrial equipment.

Information to Send Speedone for a Quotation

To help Speedone evaluate a suitable granite splitting machine, provide:

  1. Granite type
  2. Raw-material photographs
  3. Typical workpiece width
  4. Maximum workpiece width
  5. Typical thickness
  6. Maximum thickness
  7. Approximate workpiece weight
  8. Finished-product dimensions
  9. Finished-product photographs
  10. Required production volume
  11. Current processing method
  12. Preferred material-loading method
  13. Factory voltage and frequency
  14. Available installation area
  15. Whether conveyors are required

Finished-product photographs are especially useful because they show the required geometry and surface appearance more clearly than dimensions alone.

Need Help Choosing a Granite Splitting Machine?Send Speedone your granite type, raw-material photos, typical and maximum dimensions, finished-product size, target output and preferred loading method. If you are planning a conveyor-assisted system or complete production line, also provide your available factory space and current material flow.

Common Granite Splitting Machine Problems

Granite Does Not Split Along the Intended Line

Natural grain, mineral structure or existing cracks can redirect the fracture.

Excessive Chipping

Check granite condition, stone position and splitting-tool contact.

The Machine Seems to Need Too Much Pressure

Confirm that the workpiece and granite type are within the machine’s approved working range.

Do not exceed manufacturer-rated hydraulic settings.

Finished Pieces Are Too Inconsistent

Check incoming blank dimensions, stone orientation and positioning.

Some natural variation will remain because granite is not a manufactured homogeneous material.

Splitting Tools Wear Unevenly

Inspect tool alignment and contact with the workpiece.

Production Is Lower Than Expected

Measure the entire production cycle.

Loading, positioning, unloading and sorting may be limiting output more than the splitting machine itself.

Granite Splitting Machine Maintenance

Routine inspection should include:

  • Hydraulic oil
  • Electric motor
  • Hydraulic pump
  • Hydraulic cylinder
  • Hoses
  • Fittings
  • Valves
  • Pressure controls
  • Splitting head
  • Splitting tools
  • Tool guides
  • Working table
  • Machine frame
  • Electrical controls
  • Safety systems

Hydraulic leaks should be investigated promptly.

Damaged hoses should not remain in operation.

Splitting tools should be monitored for abnormal wear.

Maintenance intervals should follow the instructions for the specific machine supplied.

Granite Splitting Machine Safety

Hydraulic granite splitting equipment generates substantial force and should only be operated by trained personnel.

  • Inspect the machine before each production shift.
  • Inspect granite before loading.
  • Keep hands away from the splitting area.
  • Make sure the workpiece is stable.
  • Do not bypass machine safety devices.
  • Inspect hydraulic hoses and connections regularly.
  • Use suitable equipment for heavy-stone handling.
  • Wear appropriate personal protective equipment.
  • Keep unnecessary personnel away from the machine.
  • Follow lockout procedures during maintenance.
  • Do not exceed approved workpiece dimensions.
  • Do not exceed manufacturer-rated hydraulic pressure.
  • Replace damaged splitting tools.

Granite can fracture unpredictably and may release stone fragments during processing.

Who Uses Granite Splitting Machines?

A professional granite splitting machine may be suitable for:

  • Granite processing factories
  • Paving stone manufacturers
  • Cobblestone producers
  • Stone cube manufacturers
  • Building stone factories
  • Wall stone manufacturers
  • Landscape stone suppliers
  • Architectural stone companies
  • Quarry processing operations
  • Hardscape manufacturers
  • Stone equipment distributors

Warum Speedone wählen?

Speedone supplies professional stone-processing, stone-handling and installation equipment for factories, workshops and distributors.

When choosing a granite splitting machine, the machine should be matched to the actual production requirement rather than selected by hydraulic force alone.

A practical purchasing process is:

Granite Type → Input Size → Finished Product → Splitting Force → Splitting Head → Worktable → Material Feeding → Production Target

Also consider:

  • Machine structure
  • Hydraulic-system configuration
  • Working width
  • Working height
  • Splitting-tool design
  • Material-handling workflow
  • Production-line compatibility
  • Spare-part availability
  • Technical documentation
  • Supplier communication

The objective is to create a practical production process capable of turning granite blanks into commercially useful pavers, cobblestones, cubes, wall stone and natural-face products.

Häufig gestellte Fragen

What is a granite splitting machine?

A granite splitting machine is industrial equipment that applies concentrated force, commonly through a hydraulic system, to fracture granite into paving, wall, landscape and other natural stone products.

Is a granite splitting machine hydraulic?

Many professional granite splitting machines use hydraulic power because it provides strong and controlled splitting force.

What can a granite splitting machine produce?

Suitable machines can produce granite pavers, cobblestones, stone cubes, wall stone, landscape stone, veneer and natural split-face products.

Can a granite splitting machine make cobblestones?

Yes. Cobblestone production is a common application for appropriately configured hydraulic granite splitting equipment.

Can it produce granite paving stone?

Yes. Prepared granite strips and blanks can be hydraulically split into paving blocks and cubes.

Can it produce natural split-face granite?

Yes. Hydraulic splitting exposes the internal granite texture rather than creating the smoother surface produced by sawing.

What is the difference between a granite splitter and a granite splitting machine?

The terms often describe very similar equipment. What matters most is whether the machine’s working dimensions, force, tooling and production configuration match the granite products you need to manufacture.

How much splitting force does a granite splitting machine need?

The required force depends on granite type, workpiece width, thickness, grain structure, splitting-tool design and finished-product requirements.

Can the machine process granite blocks?

Suitable models can process granite blocks when their dimensions, weight and material characteristics are within the machine’s approved capacity.

Can a granite splitting machine use conveyors?

Suitable industrial configurations can be combined with roller or powered conveyors for repetitive paving and cobblestone production.

Can granite offcuts be processed?

Suitable structurally sound offcuts may be converted into smaller paving, wall or landscape products.

What information should I provide when requesting a quotation?

Provide granite type, raw-material photos, typical and maximum dimensions, approximate workpiece weight, finished-product dimensions, required output, factory power supply, preferred loading method and available installation space.

Was gibt es noch?



    Hinterlassen Sie Ihre Nachricht



      IHR WAGEN